Thermador MC30WS Instruction manual - Page 22
Sensor Reheat
View all Thermador MC30WS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Setting 1. Open the "Microwave Programs" menu. ~ "Setting a Microwave Program" on page 19 2. Select "Sensor Cook". 3. Swipe to the left or right to select the desired food. )UR]HQ(QWUHHV %DNHG3RWDWR 6ZHHW3RWDWR R] SRWDWRHV R] SRWDWRHV R] 4. Touch the START l STOP touch button. The appliance starts sensing. 5. Once sensing is complete a notification is displayed. Then the appliance starts cooking. The calculated cook time counts down on the display. Note: Do not open the door during the sensing process, or the process will be cancelled. Once sensing is completed, you can open the door to stir, turn or rearrange the food. Touch the START l STOP touch button to resume operation. Sensor Reheat The Sensor Reheat mode lets you reheat dinner plates or casseroles (8-12 oz) for your cooking convenience. For best results for cooking by sensor, follow these recommendations: ▯ Food cooked with the sensor system should start from normal storage temperature. ▯ Turntable tray, ceramic tray and outside of container should be dry. ▯ Foods should always be covered loosely with microwavable plastic wrap, wax paper or lid. ▯ Foods should be cooked on a microwaveable dinner plate. ▯ Touch the INFO button for information, e.g. on cookware, rack position or the addition of liquid when cooking meat. ▯ Do not open the door or touch the START l STOP touch button during sensing time. When sensing time is over, the remaining cooking time will appear in the display. At this time you can open the door to stir, turn or rearrange the food. The following chart shows the amount of food you can cook at any one time. Reheat cooking suggestions Food/Quantity Directions Dinner plate 1 serving (1 plate) Use only pre-cooked, refrigerated foods. Cover plate with vented plastic wrap or waxed paper, tucked under plate. If food is not hot enough after heating with the Reheat feature, continue heating using manual time and power level setting. Contents: ▯ 3-4 oz meat, poultry or fish (up to 6 oz with bone) ▯ 1/2 cup starch (potatoes, pasta, rice, etc.) ▯ 1/2 cup of vegetables (about 3-4 oz) Casserole, Pasta Cover plate with lid or vented plastic 1 to 4 servings wrap. If food is not hot enough after heating with the Reheat feature, continue heating using manual time and power level setting. Stir foods once before serving. Contents: ▯ Casserole: refrigerated foods (such as beef stew or lasagna) ▯ Pasta: Canned spaghetti and ravioli, refrigerated foods Setting 1. Open the "Microwave Programs" menu. ~ "Setting a Microwave Program" on page 19 2. Select "Sensor Reheat". 3. Touch the START l STOP touch button. The appliance starts sensing. 4. Once sensing is complete a notification is displayed. Then the appliance starts cooking. The calculated cook time counts down on the display. Note: Do not open the door during the sensing process, or the process will be cancelled. Once sensing is completed, you can open the door to stir, turn or rearrange the food. Touch the START l STOP touch button to resume operation. 22