Thermador POD302LW Instruction manual - Page 35

Preparing the pyrolytic self-cleaning feature 9 CAUTION Risk of fire! Loose food remnants, fat and meat juices may catch fire. Wipe the cooking compartment with a damp cloth. ▯ Remove the worst food spills from the oven. ▯ Clean the door seals, the inside of the door and the glass pane by hand as these parts are not cleaned during the pyrolytic self-cleaning cycle. ▯ Remove any loose parts from inside the cooking compartment. Make sure that nothing is left inside the cooking compartment. ▯ Close the oven door. Setting The "Self Clean ˜" function can only be started once the oven cavity is cold (room temperature) and the appliance door is closed. For your safety the appliance door is locked during this operation. Depending on the degree of soiling you can select three different intensity levels for the Self Clean cycle: Intensity level high medium low Duration (excluding cool off) 3 hours 2 ½ hours 2 hours 1. Remove the accessories from the oven cavity. 2. Turn the function selector to CLEAN MODES. 3. Swipe to the left or right to select "Self Clean˜". 4. Select a cleaning intensity. 5. Turn the temperature selector to SELF CLEAN. 6. Touch "Continue". 7. Confirm that you have removed heavy soil and accessories from the oven cavity. 8. The door lock is activated automatically. The Self Clean program is started. Note: After the completion of a Self Clean cycle, the oven will not allow you to start another Self Clean cycle for 24 hours. For a double oven, if one cavity runs Self Clean, neither cavity may operate a Self Clean cycle for 24 hours. When Self Clean is Completed When the Self Clean program has run through, a signal sounds and the appliance ends the operation automatically. The appliance will remain locked while cooling off. Once the oven cavity has cooled off, the lock will be deactivated automatically. Wipe out the remaining ash from the oven cavity with a damp cloth. Avoid These Cleaners Do not use commercial oven cleaners such as Easy Off®. They may damage the oven finish or parts. Service Faults often have simple explanations. Before calling Customer Service, please refer to the table below and attempt to correct the fault yourself. 9 WARNING RISK OF ELECTRIC SHOCK Improper repairs are dangerous. Only an authorized servicer may perform repairs and may replace damaged plug and connections. Remove the power plug or turn off the circuit breaker or fuse in the fuse box if the appliance is damaged or not working. Call Customer Service. 9 WARNING RISK OF ELECTRIC SHOCK ▯ Work on the appliance electronics must be performed by an authorized servicer. ▯ Always disconnect the appliance from the power supply when work is carried out on the electronics. Switch off the circuit breaker or remove the fuse from your household fuse box. 35