Thermador PRD486EDG Design Guide - Pro Grand Ranges - Page 8

Inch Cutout And Range Dimensions - installation instructions

Page 8 highlights

PRO GRAND RANGES INSTALLATION OPTIONS thermador pro grand® ranges feature a bold, professional design and a commercial-depth of 27-inches. these ranges can be installed in a wall or island installation. BACKGUARD the 30-inch thermador pro grand® range includes a 9-inch low backguard. an optional 22-inch high shelf backguard is also available. either backguard must be attached before sliding the range into the final installed position. an island trim is available for covering the backguard mounting flanges for island installations, where there is a minimum of 12" of horizontal clearance behind the island trim. CAUTION: to avoid possible burn or fire hazard, a backguard designed specifically for this range must be installed whenever the range is used. NATURAL GAS OR LP thermador Dual-fuel pro grand ranges are shipped by the factory to operate on natural gas. they must be converted for use with propane. verify that the type of gas being used at the installation site matches the type of gas used by the appliance. if the location/job site requires conversion from natural gas to propane (lp), order plpkit. field conversion must be done by qualified service personnel only. please refer to the lp Conversion instructions for further information. IMPORTANT We strongly recommend that a thermador professional Wall or island hood or Custom insert be installed with all thermador pro grand ranges. Downdraft ventilation should not be used. Do not install a microwave-hood combination above the cooktop, as these types of units do not provide the proper ventilation and are not suitable for use with thermador pro grand ranges. refer to the ventilation section or www.thermador.com for a complete selection of professional ventilation options, blowers, and accessories. Due to the 27-inch commercial-depth of pro grand ranges, the ph professional series Wall hoods or professional series Custom inserts would provide the appropriate depth from the wall to correspond to these ranges. PRO GRAND® RANGES 30-INCh DUAL-FUEL Model: PRD304EG 30-inCh CUtOUt anD range DimensiOns gas and electric connections * 30" minimum clearance above cooking surface to non-combustible surface. minimum clearance above cooking surface to combustible surface is 36". ** 3" minimum clearance from cooking surface to combustible side walls. Note: most hoods contain combustible components that must be considered when planning the installation. measurement in inches measurement in inches 1.800.735.4328 | thermaDOr.COm 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22

1.800.735.4328
|
THERMADOR.COM
25
30-INCH CUTOUT AND RANGE DIMENSIONS
INSTALLATION OPTIONS
Thermador Pro Grand
®
Ranges feature a bold,
professional design and a commercial-depth of
27-inches. These ranges can be installed in a wall
or island installation.
BACKGUARD
The 30-inch Thermador Pro Grand
®
Range includes a
9-inch low backguard. An optional 22-inch high shelf
backguard is also available. Either backguard must be
attached before sliding the range into the final installed
position. An Island Trim is available for covering the
backguard mounting flanges for island installations,
where there is a minimum of 12" of horizontal
clearance behind the island trim.
CAUTION:
To avoid possible burn or fire hazard, a
backguard designed specifically for this range must
be installed whenever the range is used.
NATURAL GAS OR LP
Thermador Dual-Fuel Pro Grand Ranges are shipped
by the factory to operate on natural gas. They must be
converted for use with propane. Verify that the type
of gas being used at the installation site matches the
type of gas used by the appliance. If the location/job
site requires conversion from natural gas to propane
(LP), order PLPKIT. Field conversion must be done by
qualified service personnel only. Please refer to the LP
Conversion Instructions for further information.
IMPORTANT
We strongly recommend that a Thermador
Professional Wall or Island Hood or Custom Insert
be installed with all Thermador Pro Grand Ranges.
Downdraft ventilation should not be used. Do not
install a microwave-hood combination above the
cooktop, as these types of units do not provide the
proper ventilation and are not suitable for use with
Thermador Pro Grand Ranges. Refer to the Ventilation
section or www.Thermador.com for a complete
selection of Professional ventilation options, blowers,
and accessories.
Due to the 27-inch commercial-depth of Pro Grand
Ranges, the PH Professional Series Wall Hoods or
Professional Series Custom Inserts would provide the
appropriate depth from the wall to correspond to
these ranges.
PRO GRAND
®
RANGES
30-INCH DUAL-FUEL
Model: PRD304EG
PRO GRAND RANGES
Gas and Electric connections
measurement in inches
*
30" minimum clearance above cooking surface to
non-combustible surface. Minimum clearance above
cooking surface to combustible surface is 36".
**
3" minimum clearance from cooking surface to
combustible side walls.
Note:
Most hoods contain combustible components that
must be considered when planning the installation.
measurement in inches