Thermador PRG364WLG Installation Instructions - Page 25
Data rating label
View all Thermador PRG364WLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Installing the leg covers To install the leg covers 1. Remove plastic coverings from the stainless steel covers. 3. Remove protective plastic covering from the toe kick panel. 4. Press the toe kick panel into the mounting clips. 2. Beneath the range, wrap the cover assembly around the leg. 3. Slide the outer cover up while the inner piece remains on the floor. The mating part has dimples for which the holes of the larger cover should seize. You should feel a definitive click, letting you know that the cover assembly has been mounted to the unit. 4. Repeat for all visible legs. • If additional leg covers are required, they may be ordered from the service center by calling 1-800-735-4328 at no charge for up to one year after purchase date of the appliance. Data rating label Data rating label The data rating label shows the model and serial number of your appliance. The slide-out plate can be accessed by first removing the kick panel, as shown below. Toe kick panel (optional) To install the toe kick panel 1. Dismount the leg covers from the extruded dimples. 2. Remove the door trim from their mounting clips. (No tools required.) Electric wiring diagrams and schematics The electric wiring diagrams and schematics are attached behind the toe kick, and should not be removed except by a service technician, then replaced after service. Page. 24