Thermador T30IR70NSP Design Guide - Freedom Refrigeration - Page 45

FREEDOM® COLLECTION 36-INCH FRENCH DOOR BOTTOM FREEZER Model: Framed Unit T36BT71FSE INSTALLATION OPTIONS The Freedom® Collection offers you a variety of installation possibilities. In some instances, special accessories are required! INDIvIDUAL COLUMN INSTALLATIONS T36BT71FSE 36-Inch Framed, 3-Door Pre-assembled with Chiseled Stainless Steel Panels and Professional Handles SPECIFICATIONS Total Capacity (cu. ft.) Refrigerator Capacity (cu. ft.) Freezer Capacity (cu. ft.) Product Width Product Height Product Depth* Cutout Width Cutout Height Cutout Depth Door Swing Clearance Annual Energy Consumption Electrical Supply Power Cord Included Shipping Weight (lbs.) *Depth without door panel 19.6 14.3 5.3 35 3/4'' 84" 24" 36" 84" 24" Minimum 20 21/32" 448 kWh 120V/15 Amp Circuit 120V-3 prong 545 ACCESSORIES See pages 232- 233 for Freedom Collection accessories. INDIvIDUAL APPLIANCES wITH PARTITION When dimensioning the partition for model 4, note the thickness of the furniture fronts to prevent damage if the doors are opened at the same time. Use the Extreme Combination Side-by-Side Heating Kit (XHEATKIT10) if the gap between the appliance is less than 6" (160 mm) or for permanent connection of two individual appliances, (e.g. freezer or bottom mount appliance next to a freezer). Minimum thickness of the partition 5/8" (16 mm). 1 2 3 4 AT THE END OF A kITCHEN If one side of the appliance is visible, a side panel must be used. The side panel must be connected firmly to the wall, the floor and the overhead furniture/fixtures before the appliance is placed in the cavity. The dimensions of the side panel are taken from the opposite cavity wall. During installation ensure that the cavity is square and the exact size. All refrigerators are UL and CUL approved. 254