Toro 20330 Service Manual - Page 108
Toro Recycler/rear Bagger
UPC - 021038203300
View all Toro 20330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
BBC / BOS / BCS TORO RECYCLER/REAR BAGGER BBC 2. On the left side of the mower next to the rear wheel, loosen the clamp that secures the BBC cable to the mower housing. Near the left front wheel, unhook the spring end of the cable from the bellcrank. Remove the screw, bellcrank, sleeve, and unhook the control link from the lever (Fig. 184). Fig 183 1350-001 a Idler Arm System Disassembly (Recycler/ Rear Bagger) 1. Drain the fuel and oil. Remove the spark plug wire. Disassembly for the idler arm begins on top of the mower housing. Fig 184 3428-0174 3. Take a loop of wire or rope and unhook the spring under the lever (Fig. 185). With the tension removed you can now remove the long screw through the lever. We would suggest loosening this screw, but leave it engaged at this time (Fig. 187). 6-22 B C A A. Spring B. Screwdriver Fig 185 C. Wire loop 3428-0177-2 WPM Drive Systems Manual