Toshiba 20HLK86 User Manual - Page 19

TV control Setting up your Using the remote Connecting your E Installing or replacing the remote control F battery S To install the battery: Caution: 1. Before proceeding, make sure your hands are dry. Never throw batteries into a fire. Introduction 2. Turn the remote control over to view its back. 3. As illustrated, place a coin or a coin-like object in the slot of the battery cover and turn the coin following the direction indicated on the battery cover to open it. Note: If the battery cover proves difficult to remove after turning the coin, pat the remove control repeatedly until the battery cover falls on your hand. 4. Remove any existing battery (if necessary) and install a new battery (CR2032). Note that the positive (+) polarity should face outward. Note: • Be sure to use a CR2032 battery. • Dispose of an old battery in a designated disposal area. • The battery should always be disposed of with the environment in mind. Always dispose of the battery in accordance with applicable laws and regulations. • If the remote control does not operate correctly, or if the operating range becomes reduced, replace the battery with a new one. • Always remove the battery from remote control if it is dead or if the remote control is not to be used for an extended period of time. This will prevent battery acid from leaking into the battery compartment. 5. Replace the battery cover on the remote control and turn the battery cover (with a coin or coin-like object) back into place. Remote control effective range TV Using the TV's features Appendix Index 19