Toshiba 20HLK86 User Manual - Page 32

Using the TV's features Adjusting the sound Muting the sound Press MUTE to temporarily turn off the sound. While the sound is off, the screen will display " " in the upper right corner. To restore the sound, press MUTE again. Selecting stereo/SAP broadcasts The multi-channel TV sound (MTS) feature allows you to listen to high-fidelity stereo sound while watching TV. MTS can also transmit a second audio program (SAP) containing a second language, music, or other audio information (when provided by individual stations). When the TV receives a stereo or SAP broadcast, the word "ST.SAP", "Stereo" or "SAP" appears on-screen every time the TV is turned on, the channel is changed, or DISPLAY is pressed. When the TV is in VIDEO1, VIDEO2, PC, or HDMI mode, the options for MTS feature are L+R, L+L, R+R. Your selection decides from which speaker the audio is output. To listen to different sound types: • Using the remote control Repeatedly press MTS to select Stereo, SAP, or Mono. You can leave your TV in Stereo mode because it will Stereo automatically output the SAP type of sound being Mono broadcast (stereo or monaural). If the stereo sound is noisy, select Mono to reduce the noise. If you select SAP, You will hear the station's second audio program (if available) from the speakers, while viewing the original program's picture. • Using the On-Screen Display menu 1. Press MENU/ENTER, and then press W or X until the Audio menu appears. 2. Press S or T to highlight MTS. 3. Press W or X to select Stereo, SAP, or Mono. Audio Sound Mode Flat Balance 0 MTS Stereo AVL Off Speaker Out On Audio Advanced Setting > MENU/ENTER EXIT Audio Sound Mode Flat Balance 0 MTS Stereo AVL Off Speaker Out On Audio Advanced Setting > MENU/ENTER EXIT Note: The operation methods mentioned above can also be applied when the TV is in VIDEO1, VIDEO2, PC, or HDMI mode. 32 MUTE MENU/ ENTER STW X MTS