Toshiba 20HLK86 User Manual - Page 9

Rear terminal cover, Cable clamper, Adjusting the TV viewing angle

Page 9 highlights

TV E F Rear terminal cover S The connection panel is hidden behind the terminal cover. Introduction 1. Remove the cover. Release the two hooks on the both sides of the cover. 2. Install cables as necessary. 3. Reinstall the cover. Align the holes on the TV back with the three tabs on the rear terminal cover as shown. 4. Close the cover. Setting up your Using the remote Connecting your Cable clamper The cable clamper can be used to bundle the connection cables (see page 10). WARNING: RISK OF SERIOUS PERSONAL INJURY OR EQUIPMENT DAMAGE! Never grasp the cable clamper when moving or lifting the TV. The cable clamper could break, causing the TV to fall. Cable clamper Adjusting the TV viewing angle You can adjust the angle of the TV screen. Tilt angle control TV Using the TV's features Appendix Index 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42

9
Introduction
Connecting your
TV
Using the remote
control
Setting up your
TV
Using the TV's
features
Appendix
Index
E
S
F
Rear terminal cover
The connection panel is hidden behind the terminal cover.
1. Remove the cover. Release the two hooks on the both
sides of the cover.
2. Install cables as necessary.
3. Reinstall the cover. Align the holes on the TV back with the
three tabs on the rear terminal cover as shown.
4. Close the cover.
Cable clamper
The cable clamper can be used to bundle the connection
cables (see
page 10
).
Adjusting the TV viewing angle
You can adjust the angle of the TV screen.
Cable clamper
Tilt angle
WARNING: RISK OF
SERIOUS PERSONAL
INJURY OR EQUIPMENT
DAMAGE!
Never grasp the cable clamper when
moving or lifting the TV. The cable
clamper could break, causing the TV
to fall.