Toshiba 27AF44 User Manual - Page 16

Adding channels to the TV's memory Your TV will stop on specific channels that are stored in the TV's channel memory when you press Channel + or -. Use the steps below to set all active channels in your area automatically. Programming channels automatically Your TV can automatically detect all active channels and store them in its memory. After the TV has stored the channels in its memory automatically, you can add or erase channels manually. To add channels automatically: 1. Press MENU, then press or to display the SETUP menu. 2. Press ▲ or ▼ until the TV/CABLE selection is highlighted. 3. Press or to highlight either TV or CABLE, depending on which you use. If you use an antenna, choose TV. CH PICTURE AUDIO SETUP OPTION TV / CABLE TV CABLE CH PROGRAM START ADD / ERASE ADD If you use cable, choose CABLE. SELECT ADJUST 4. Press ▼ to select CH PROGRAM. 5. Press or to start channel programming. The TV will automati- cally cycle through all the TV or Cable channels (depending on which you selected), and store all active channels in the channel memory. While the TV is cycling through the channels, the message "PROGRAMMING NOW-PLEASE WAIT" appears. 6. When channel programming is complete, the message "COMPLETED" appears. 7. Press CH + or - to view the programmed channels. Adding and erasing channels manually After you have programmed the channels automatically, you can add or erase specific channels manually. To add or erase channels manually: 1. Select the channel you want to add or erase. If adding channels, you must select the channel to add using the Channel Number buttons. 2. Press MENU, then press or to display the SETUP menu. 3. Press ▲ or ▼ to highlight ADD/ ERASE. 4. Press or to select ADD or CH PICTURE AUDIO SETUP OPTION TV / CABLE CH PROGRAM ADD / ERASE CABLE START ADD ERASE ERASE, whichever function you want to perform. 5. Repeat steps 1~4 for other SELECT ADJUST channels you want to add or erase. Changing channels To change to the next programmed channel: Press Channel ▼ or ▲ on the TV or CH + or - on the remote control. To change to a specific channel (programmed or unprogrammed): Press the Channel Number buttons (0-9 and 100) on the remote control. For example, to select channel 125, press 100, 2, 5. POWER TV 12 45 VCR CABLE DVD 3 +10 6 100 7890 CH + VOL VOL - MENU/ ENTER + Channel Numbers Channel +/- Menu EXIT CH - RECALL TV/VIDEO FAV VOL CH RTN FAV RESET CAP/TEXT 1/2 16:9 DISPLAY DVD CLEAR TOP MENU DVD MENU CODE MTS SLEEP MUTE Exit Setting up your TV 3N11501A[E] P07-16 16 16 8/1/18, 12:25