Toshiba 32L1400U User's Guide for L1400 Series TV's - Page 31
Connecting a digital audio system, Sound, Digital Audio Output, ENTER
View all Toshiba 32L1400U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
31 Connecting Your TV Connecting a digital audio system The TV's Digital Audio Out terminal outputs a Dolby® Digital or 2-channel down-mixed PCM (pulse-code modulation) signal for use with an external Dolby® Digital decoder or other external audio system with optical audio input. You will need an optical audio cable (Use an optical audio cable that has the larger "TosLinkTM" connector and not the smaller "mini-optical" connector.) TV back panel Digital decoder or other digital audio system (Sample Illustration) 32/40/50L1400U-Connecting a digital audio system To control the audio: 1 Turn on the TV and the digital audio device. 2 Press the MENU button on the remote control and open the Sound menu. 3 Press the ▲/▼(arrow) buttons to select Digital Audio Output and then press the ENTER button. 4 Press the ◄/► (arrow) buttons to select either Auto or PCM, depending on your device. Some audio systems may not be compatible with Dolby® Digital bitstream signal.Older audio systems that are not compatible with standard optical out signals may not work properly, creating a high noise level that may damage speakers or headphones. THIS DAMAGE IS NOT COVERED BY YOUR WARRANTY. The DIGITAL AUDIO OUT terminal may not output some digital audio sources because of copy restrictions. vThe Dolby® Digital format is available in the following situations: - When tuned to a digital RF channel - When an HDMI® input is used