Toshiba 32L1400U User's Guide for L1400 Series TV's - Page 87
No Signal Power Down, Using HDMI® CEC, HDMI® CEC playback device (Blu-rayTM/DVD player
View all Toshiba 32L1400U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
87 Setting up your TV Using HDMI® CEC No Signal Power Down The TV will automatically turn itself off after 15 minutes when no signal is detected. You can change the setting to Off for the following purposes: v Low signal strength of analog channel (no signal detection) v Only Audio L/R is connected to external input to listen to music through the TV speakers. To change the no signal power down setting: 1 From the Options menu, highlight Power Management, and then press the ENTER button. 2 Highlight No Signal Power Down, and then press the ENTER button. 3 Press the ▲/▼(arrow) buttons to highlight the item you want to change, and press the ◄/►(arrow) buttons to select On or Off. v Default setting for this feature is On. v A warning message will appear 1 minute before the TV turns off. Using HDMI® CEC This is a new feature that uses CEC technology and allows you to control Toshiba HDMI® CEC compatible devices from the TV remote via HDMI® (see "HDMI® CEC connection" on page 29) When Enable HDMI CEC Control in the HDMI CEC Control Setup menu is set to On (see "Setting up HDMI® CEC" on page 90), the HDMI® CEC functions described below will be enabled. HDMI® CEC playback device (Blu-rayTM/DVD player, etc.) control With your TV's remote control, or using the HDMI® CEC Player Control menu, you can control the connected HDMI® CEC playback device you are watching. Available remote control key functions Button: PLAY STOP PAUSE SKIP Forward SKIP Reverse Description: Begin playback Stop playback Pause the picture during play or record mode Skip Forward Skip backward