Home » Toshiba Manuals » Flat Panel Televisions » Toshiba 42SL417U » Manual Viewer

Toshiba 42SL417U User Manual - Page 43

Setting the sleep timer, Setting Automatic Power Down, Setting No Signal Power Down

Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

Chapter 6: Basic features Setting the sleep timer You can set the TV to turn off after a specific amount of time (maximum = 12 hours). Using the remote control: 1 Press [ 2 Set the time until the TV turns off. •Repeatedly press [ to increase the time. •Press B or b to increase or decrease the time. Using the onscreen menus: 1 > Settings > APPLICATIONS > Sleep Timer. (Another: > Timer > Sleep Timer > OK .) 2 Enter the time until the TV turns off. •Use the number buttons. •Press C or c to increase or decrease the time. Note: If a power failure occurs, the sleep timer setting may be cleared. To display the time remaining until the TV turns off: Press [. To cancel the sleep timer: Press [ repeatedly or press B or b until it is set to 0 minutes. Setting Automatic Power Down The TV can be configured to automatically turn itself off after 4 hours if you do not operate the TV either from the remote control or the TV control panel. 1 > Settings > PREFERENCES > Energy Saving Settings > . OK 2 Press B or b to select Automatic Power Down. 3 Press C or c to select On. Press . Note: • 1 minute before switching to standby, a warning message will appear. • When the following features are set, the feature that is set for the nearest time will function. - Automatic Power Down - Sleep Timer - Wallpaper/Auto Power Off - Auto shutdown after 1 hour of inactivity (after powering on by On Timer) - No signal auto power off (after 14 minutes of no signal) Setting No Signal Power Down When an input's setting in this feature is set to On, The TV will automatically turn itself off after 14 minutes if no signal is detected. You can change each input's setting to Off: ANT/ CABLE, Video 1, Video 2, ColorStream HD1, ColorStream HD2, HDMI 1, HDMI 2, HDMI 3, HDMI 4, PC 1 > Settings > PREFERENCES > Energy Saving Settings. Press . OK 2 Press B or b to select No Signal Power Down. Press . OK 3 Press B or b to highlight the item you want to change. 4 Press C or c to select On or Off. Press . Note: • Default setting for each input is On. • A warning message will appear 1 minute before turning off. 43

Section	Page
Important Safety Instructions	3
Installation, Care, and Service	3
Choosing a location for your LCD TV	5
Contents	9
Chapter 1: Introduction	11
Features	11
Overview of installation, setup,and use	11
Front panel control	12
Back panel connections	12
Bundling the cables	13
Chapter 2: Connecting your TV	14
Overview of cable types	14
About the illustrations	14
Connecting to a Satellite dish, an Antenna, or Cable TV	15
Connecting an HDMI® or DVI device to the HDMI input	16
Connecting a VCR or DVD player with ColorStream® (component video)	17
Connecting a digital audio system	18
Using the TV remote and HDMI® CEC Control to control other devices	19
Connecting an HDMI audio system	19
Connecting a PC	20
Connecting to a home network	21
Chapter 3: Using the remote control	22
Controlling other devices	22
Installing batteries	22
Learning about the Remote Control	23
Chapter 4: Initial Setup and Menu	24
Initial Setup	24
Navigating the menu system	25
Main menu layout	26
Quick menu	27
Chapter 5: Setting up your TV	28
Changing Initial settings	28
Menu language	28
Local Time Setting	28
Location	28
ANT/CABLE IN	28
Storing channels in memory(optional)	28
Auto Tuning	28
Manual Tuning	29
Skipping channels	29
Skipping video inputs	29
Labeling channels	30
Labeling video inputs	30
Configuring shared inputs	30
Setting the Auto Input feature	31
Chapter 6: Basic features	32
Tuning channels	32
Setting the Channel Tuning Mode	32
Tuning in to the next programmed channel	32
Tuning in to a specific channel (programmed or unprogrammed)	32
Using the Channel Browser™	32
Using Channel Return	34
Using SurfLock™	34
Selecting the video input to view	34
Using closed captions	35
Analog CC mode	35
Digital CC settings	35
Setting the PIN code	36
Entering a new PIN code	36
Changing or deleting your PIN code	36
Forgotten PIN code	36
Using parental controls	36
Blocking TV programs and movies byrating (V-Chip)	36
Downloading an additional ratingsystem	37
Displaying ratings	38
Unlocking programs	38
Locking specific channels	38
Locking video input	38
Setting a time limit for games	39
Locking the control panel	39
Using HDMI® CEC Control	39
Controlling HDMI® CEC playbackdevices	40
HDMI® CEC Control input sourceselection	40
Adjusting the amplifier’s audio	41
Other HDMI® CEC Control functions	41
Using the HDMI® settings feature	41
Viewing the HDMI® signalinformation	41
Using your PC with the TV	42
Adjusting the image	42
Setting the PC audio	42
Setting the timer to turn on the TV	42
Setting the sleep timer	43
Setting Automatic Power Down	43
Setting No Signal Power Down	43
Displaying TV status information	44
Viewing support information	44
Resetting to Factory Defaults	44
Power failure	44
Chapter 7: Picture and sound controls	45
Selecting the picture size	45
Scrolling the picture	47
Using the Auto Aspect feature	47
Using the 4:3 Stretch	47
Freezing the picture	47
Adjusting the picture	48
Selecting the picture mode	48
Adjusting the picture quality	48
Using the advanced picture settings features	49
Edge Enhancer	49
Dynamic Contrast	49
DynaLight™	49
Static Gamma	49
Film Stabilization	49
ClearFrame™ feature	50
MPEG NR	50
DNR	50
Auto Brightness Sensor	50
Backlight Adjustment Pro	50
ColorMaster™	51
Base Color Adjustment	51
Color temperature	51
Resetting to the factory default	51
Setting the Expert Picture Settings	51
Test Pattern	51
RGB Filter	51
White Balance	51
Resetting to the factory default	52
Locking the picture settings	52
Adjusting the audio	52
Muting the sound	52
Selecting stereo/SAP broadcasts	52
Adjusting the audio balance	53
Adjusting the range	53
Selecting the optical audio output format	53
Using the Dolby® Digital Dynamic Range Control feature	53
Using Audyssey Dynamic Volume®	53
Using advanced sound features	54
Using surround sound	54
Chapter 8: Advanced features	55
Using your home network	55
Setting up the Network	56
Wireless Setup	56
Advanced Network Setup	58
Network Connection Test	59
Using the software keyboard	59
Performing a Software Upgrade	60
Viewing the Software Licenses	60
Using the NET TV™ feature	60
NET TV menu	60
Netflix	61
VUDU™	61
YouTube™	61
CinemaNow	62
Blockbuster	62
Pandora	62
Yahoo!® TV Widgets	62
Using the Media Player	64
Media Player Specifications	64
Basic operation	64
Viewing Movie files	65
Playing Music file	66
Viewing Photo files	67
Using the Wallpaper feature	69
Chapter 9: Troubleshooting	70
General troubleshooting	70
LED indications	72
Chapter 10: Appendix	73
Specifications	73
Acceptable signal formats for PC IN and HDMI terminals	75
PC IN signal formats	75
HDMI signal formats	76
Remote control functional key chart	77
Operating other devices	79
Programming the remote to operate other devices	79
Device code setup	79
Searching for a device code	80
Locking the volume keys	80
Clearing the remote’s programming	80
Resetting to the factory default	80
Operating the TV with combination buttons	81
Remote control codes	82
Limited United States Warranty for LCD Televisions	88
Limited Canadian Warranty for Toshiba Brand Flat Panel Televisions	89

Match case Limit results 1 per page

Chapter 6: Basic features

Setting the sleep timer

You can set the TV to turn off after a specific amount of

time (maximum = 12 hours).

Using the remote control:

Press

[

Set the time until the TV turns off.

•

Repeatedly press

[

to increase the time.

•

Press

to increase or decrease the time.

Using the onscreen menus:

ettin

APPLICATION

leep Timer

(Another:

Timer

leep Timer

Enter the time until the TV turns off.

•

Use the number buttons.

•

Press

to increase or decrease the time.

Note:

If a power failure occurs, the sleep timer setting may

be cleared.

To display the time remaining until the TV turns off:

Press

[

To cancel the sleep timer:

Press

[

repeatedly or press

until it is set to 0

minutes.

Setting Automatic Power Down

The TV can be configured to automatically turn itself off

after 4 hours if you do not operate the TV either from

the remote control or the TV control panel.

ettin

PREFERENCE

Ener

avin

ettin

Press

to select

Automatic Power Down

Press

to select

. Press

Note:

•

1 minute before switching to standby, a warning

message will appear.

•

When the following features are set, the feature that is set

for the nearest time will function.

–

Automatic Power Down

–

Sleep Timer

–

Wallpaper/Auto Power Off

–

Auto shutdown after 1 hour of inactivity (after

powering on by On Timer)

–

No signal auto power off (after 14 minutes of no

signal)

Setting No Signal Power Down

When an input's setting in this feature is set to On, The

TV will automatically turn itself off after 14 minutes if

no signal is detected.

You can change each input's setting to Off: ANT/

CABLE, Video 1, Video 2, ColorStream HD1,

ColorStream HD2, HDMI 1, HDMI 2, HDMI 3, HDMI 4,

ettin

PREFERENCE

Ener

avin

ettin

. Press

Press

to select

nal Power Down

Press

to highlight the item you want to

change.

Press

to select

Off

. Press

Note:

•

Default setting for each input is

•

A warning message will appear 1 minute before turning

off.