Toshiba 61A60 Service Manual - Page 20

GENERAL ADJUSTMENTS SPECIFIC INFORMATIONS PROGRAMMING CHANNEL MEMORY The channel memory is the list of TV channel numbers the TV tunes in when you press the CHANNEL s or t button. First, use the TV/CABLE and CH PROGRAM functions to preset all active channels in your area automatically. If necessary, arrange the preset channels with the ADD/ERASE functions so that you can tune into only desired channels. Note: If you utilize both ANT-1 and ANT-2 terminals for some model, perform programming channels for each input source. TV/CABLE function 1 Press MENU, then press S or T until the SET UP menu appears. 2 Press t (or s) until "TV/CABLE" is highlighted. 3 Press : or ; to highlight either "TV" or "CABLE", whichever you use. CH PROGRAM function 1 Select "CH PROGRAM" following steps 1 and 2 above. 2 Press : or ; to start channel programming. The TV will automatically cycle through all the TV or CABLE channels selected by the TV/CABLE function, and store active channels in the channel memory. 3 When channel programming is complete, you will see the message to the right appears. 4 Press CHANNEL s or t to make sure the channel programming has been done properly. ADD/ERASE function After performing the CH PROGRAM function, you can add or erase specific channels. 1 Select the channel you want to erase using the CHANNEL s or t button, or select the channel you want to add using the Channel Number buttons. 2 Press MENU, then press S or T until the SET UP menu appears. 3 Press t (or s) until "ADD/ERASE" is highlighted. 4 Press S or T : To erase the channel press the button until "ERASE" is highlighted. To add the channel press the button until "ADD" is highlighted. 5 Repeat steps 1 to 4 for other channels. You have now completed the channel programming. Note: The CHANNEL t/s buttons on the TV function as the t/s buttons while a menu is on the screen. * Please refer to owner's manual in detail. - 20 -