Toshiba 65HX93 Owners Manual - Page 23
To edit the IEEE-1394 device information
View all Toshiba 65HX93 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Chapter 2: Connecting your TV Connecting IEEE-1394 (Firewire™) video devices (continued) IEEE-1394 device initialization When you connect a new IEEE-1394 device to the TV and turn it on, the device immediately announces its presence to the TV (and other networked IEEE-1394 devices, if any), and the following device initialization screen automatically appears. Note: With some devices, it may take up to one minute for this screen to appear. New IEEE1394 Device Initialization Manufacturer Device Type Analog Input Used Custom Label Brandname VCR None Edit Label Save 1. If you connected your IEEE-1394 device to an analog input also, use the yzx • buttons to select the input in the ANALOG INPUT USED field; otherwise, leave it set to "None." (See "Using analog-compatible IEEE-1394 devices" on page 22.) 2. If you want to label the device, highlight EDIT LABEL, press ENTER, and then use the yzx • buttons to input the label. 3. Highlight SAVE and press ENTER to save the information. New IEEE1394 Device Initialization Manufacturer Device Type Analog Input Used Custom Label Brandname VCR VIDEO 1 My D-VHS Edit Label Save Note: • The TV may not recognize non-A/V or non-compatible IEEE-1394 devices; however, these devices may still be available to other compatible IEEE-1394 devices on the network. • You may be able to use the TV's remote control to operate some compatible IEEE-1394 devices. You must first program the remote control to recognize the device (see pages 30-33). If you have an IEEE-1394 Cable box or satellite receiver, you may need to use the remote control that came with the device. IEEE-1394 device management The IEEE-1394 device information is saved permanently in the TV's memory. You can edit this device information (for example, to edit the device name, change the analog input information, or delete the device information from the TV's memory if you no longer use that device). To edit the IEEE-1394 device information: 1. Press MENU and open the SETUP menu. 2. Highlight INSTALLATION and press ENTER. (A new set of INSTALLATION menu icons will appear on-screen, as shown in step 3 below). Setup Installation Sleep Timer On/Off Timer Digital Tuner Hold Off Slide Show Interval 2 Sec Convergence 3. Open the DEVICES menu, highlight IEEE-1394 DEVICES, and press ENTER. Devices IEEE1394 Devices TheaterNet Devices 4. Highlight the device you want to edit, and follow the on-screen prompts. IEEE1394 Device Management Brand Analog Type Label Input Connected Brandname VCR Brandname STB Brandname VCR None Yes VIDEO 2 No ColorStr Yes Delete All Exit Copyright © 2003 TOSHIBA CORPORATION. All rights reserved. 23