Toshiba 65HX93 Owners Manual - Page 51
Adjusting the color convergence, Setting the time and date
View all Toshiba 65HX93 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Chapter 6: Setting up your TV Adjusting the color convergence (continued) 6. Press ENTER to change the color (to blue, in this example). 7. Press y z x • to align the blue and white lines. 8. Press EXIT to display the 56-point convergence screen (below). 9. Press y z x • to select the area to adjust. 10. Press ENTER to adjust the selected area. Setting the time and date Note: If you already set up the TV Guide On Screen system, the time and date were set automatically and you can skip this step. To set the time and date: 1. Press MENU and open the SETUP menu. 2. Highlight INSTALLATION and press ENTER. (A new set of INSTALLATION menu icons will appear on-screen, as shown in step 3 below.) 3. Open the TIME AND DATE menu, highlight START SETUP, and press ENTER. : TO SELECT POSITION ENTER: TO ADJUST CONVERGENCE EXIT : TO FINISH ADJUSTMENT 11. Press y z x • to align the red (in this example) and white lines in the selected cross. 12. Press ENTER to change the color (to blue, in this example). : TO ADJUST RED ENTER: TO CHANGE COLOR EXIT : TO FINISH ADJUSTMENT 13. Press y z x • to align the blue and white lines. : TO ADJUST BLUE ENTER: TO SELECT POSITION EXIT : TO FINISH ADJUSTMENT 14. Press ENTER to select another area to adjust. Setup Installation Sleep Timer On/Off Timer Digital Tuner Hold Off Slide Show Interval 2 Sec Convergence Time and Date Start Setup If you have not set up the TV Guide On Screen system, the following screen will appear. To set the time, highlight TV GUIDE and press ENTER. The TV Guide On Screen setup sequence will start, and the time and date will be set automatically. Time and Date Your TV Guide On Screen system can provide accurate time and date information. It is recommended you set up TV Guide On Screen first, and use it to obtain the time and date. Manual TV Guide Cancel Note: If you do not set up the TV Guide On Screen system and you manually set the time and date (by highlighting MANUAL instead of TV GUIDE, above), you will lose the time and date information if a power outage occurs. If you set the time and date through the TV Guide On Screen system and a power outage occurs, the time and date will be updated automatically when the power is restored. : TO SELECT POSITION ENTER: TO ADJUST CONVERGENCE EXIT : TO FINISH ADJUSTMENT 15. Repeat steps 10-14 until you are done adjusting the convergence. 16. When done adjusting the convergence, press EXIT to close the screen and return to normal TV viewing. Copyright © 2003 TOSHIBA CORPORATION. All rights reserved. 51