Toshiba 65HX93 Owners Manual - Page 62
Labeling the video input sources
View all Toshiba 65HX93 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Chapter 8: Using the TV's features Labeling the video input sources You can label each video input source according to the type of device you connected to each source, from the following preset list of labels: - - (default label) Audio Receiver VCR Video Recorder Laser Disk Compact Disc DVD DTV SAT (Satellite box) CBL (Cable box) HD (High-definition device) Note: • If you set up devices in TheaterNet, the associated inputs are automatically labeled and cannot be relabeled until you remove the device from TheaterNet (see page 45). • You cannot select IEEE-1394 devices through the INPUT SELECTION window; however, you can select and control IEEE-1394 devices through TheaterNet (see page 45). To label the video input sources: 1. Press MENU and open the PREFERENCES menu. 2. Highlight INPUT LABELING and press ENTER. Preferences Favorite Channels Closed Caption Mode Off Closed Caption Advanced Input Labeling Menu Language English 3. Press z or y to highlight the video source you want to label. 4. Press x or • to select the desired label for that input source. Input labeling Video 1 Video 2 Video 3 ColorStream HD1 ColorStream HD2 DVI Save Cancel VCR - - - - DVD - - HD Reset 5. To save the labels, highlight SAVE and press ENTER. Input labeling example: If you connect a VCR to VIDEO 1, a DVD player to ColorStream HD-1, and a high-definition device to DVI/HDCP, and then label the video input sources accordingly (as shown in step 4 at left), when you press INPUT or TV/VIDEO, the INPUT SELECTION screen would then look like the screen below right: Input Selection Video 1 O : ANT 1 1 : Video 1 2 : Video 2 3 : Video 3 4 : ColorStream HD 1 5 : ColorStream HD 2 6 : DVI 7 : ANT 2 0 - 7/ INPUT : TO SELECT Input Selection Video 1 O : ANT 1 1 : VCR 2 : Video 2 3 : Video 3 4 : DVD 5 : ColorStream HD 2 6 : HD 7 : ANT 2 0 - 7/ INPUT : TO SELECT Input Selection screen with no inputs labeled Input Selection screen with inputs 1, 4, and 6 labeled To clear the video labels: 1. Press MENU and open the PREFERENCES menu. 2. Highlight INPUT LABELING and press ENTER. 3. Highlight RESET and press ENTER. 4. Highlight SAVE and press ENTER. Preferences Favorite Channels Closed Caption Mode Off Closed Caption Advanced Input Labeling Menu Language English Input labeling Video 1 Video 2 Video 3 ColorStream HD1 ColorStream HD2 DVI Save Cancel VCR Reset Note: Labels for devices you set up in TheaterNet will not be cleared until you remove the device from TheaterNet (see page 45). The screen above right illustrates an example of the Input Labeling screen after it was reset that still shows the VCR label for VIDEO 1 because the VCR was set up in TheaterNet. 62 Copyright © 2003 TOSHIBA CORPORATION. All rights reserved.