Toshiba 65HX93 Owners Manual - Page 79

Chapter 8: Using the TV's features Adjusting the audio (continued) Turning off the built-in speakers Use this feature to turn off the TV speakers when you connect an audio system to your TV (see "Connecting a digital audio system" and "Connecting an analog audio system" on page 19). To turn off the built-in speakers: 1. Press MENU and open the AUDIO menu. 2. Highlight AUDIO SETUP and press ENTER. Audio Setup Audio Audio Settings Advanced Audio Settings Audio Setup MTS Language Speakers Audio Out Optical Output Format Save Done Stereo English Off Main Dolby Digital Reset 3. Press z to highlight the SPEAKERS field, and then press • to select OFF. 4. To temporarily save the new settings, highlight DONE and press ENTER. To permanently save the new settings, highlight SAVE and press ENTER. To turn on the built-in speakers: Select ON in step 3 above. Selecting the optical audio output format Use this feature to select the optical audio output format when you connect a Dolby Digital decoder or other digital audio system to the OPTICAL AUDIO OUT jack on the TV (see "Connecting a digital audio system" on page 19). To select the optical audio output format: 1. Press MENU and open the AUDIO menu. 2. Highlight AUDIO SETUP and press ENTER. 3. Press z to highlight the OPTICAL OUTPUT FORMAT field, and then press • to select either DOLBY DIGITAL or PCM, depending on your device. Audio Setup Audio Audio Settings Advanced Audio Settings Audio Setup MTS Language Speakers Audio Out Optical Output Format Save Done Stereo English On Main Dolby Digital Reset 4. To temporarily save the new settings, highlight DONE and press ENTER. To permanently save the new settings, highlight SAVE and press ENTER. Selecting the AUDIO OUT sound This feature allows you to select the audio source (MAIN or POP) that is output from the AUDIO OUT jacks. This is useful when amplifying or recording the POP sound with external equipment while hearing the sound of the main picture through the TV's built-in speakers. To select the Audio OUT sound: 1. Press MENU and open the AUDIO menu. 2. Press z to highlight AUDIO SETUP and press ENTER. Audio Audio Settings Advanced Audio Settings Audio Setup 3. Press z to highlight the AUDIO OUT field, and then press x or • to select MAIN or POP. - MAIN: Outputs the sound of the main program through the AUDIO OUT jacks. - POP: Outputs the sound of the POP program through the AUDIO OUT jacks. Audio Setup MTS Language Speakers Audio Out Optical Output Format Save Done Stereo English On Main Dolby Digital Reset Audio Setup MTS Language Speakers Audio Out Optical Output Format Save Done Stereo English On POP Dolby Digital Reset 4. To temporarily save the new settings, highlight DONE and press ENTER. To permanently save the new settings, highlight SAVE and press ENTER. Note: • When the POP window is not open, the sound of the main program is output through the AUDIO OUT jacks, even if POP is selected in the AUDIO OUT menu. • The sound of the main program is always output through the TV speakers, regardless of the AUDIO OUT setting. Copyright © 2003 TOSHIBA CORPORATION. All rights reserved. 79