Toshiba BDX2200 Owners Manual - Page 7

INTRODUCTION Identification of Controls Front panel 1 2 3 456 7 8 1. Disc tray 2. Display 3. Remote sensor 4. OPEN/CLOSE button 5. STOP button 6. PLAY button 7. POWER button • Press to turn on the unit, or to turn the unit into the standby mode. (To completely turn off the unit, you must unplug the AC power cord.) 8. SD/SDHC card slot Rear panel 1 2 34 5 6 7 COAXIAL DIGITAL ANALOG HDMI OUT USB LAN 1. AC power cord • Connect to a standard AC outlet to supply power to this unit. • Unplug this cord from the AC outlet to completely turn off the unit. 2. COAXIAL DIGITAL AUDIO OUT jack • Use to connect an AV receiver / amplifier, Dolby Digital / DTS decoder or other device with a coaxial digital audio input jack using a coaxial digital audio cable. 3. VIDEO OUT jack • Use to connect a TV, an AV receiver or other device with a composite video cable. 4. ANALOG AUDIO OUT(L/R) jacks • Use to connect a TV, an AV receiver / amplifier or other device with a composite audio cable. 5. HDMI OUT jack • Use to connect a TV with an HDMI compatible port via an HDMI cable. 6. USB jack • Use to connect USB flash drives/wireless LAN adapter (not included). 7. LAN terminal • Use to connect a network equipment with LAN cable. 7