Toshiba D-R560KU Owner's Manual - English - Page 47
Toshiba D-R560KU Manual
View all Toshiba D-R560KU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
BASIC RECORDING & ONE-TOUCH TIMER RECORDING Introduction 6 Press [REC I] to start recording. "I" will be displayed for 5 seconds. 7 Press [STOP C] to stop recording. The recorded title will be included in the title list. (Refer to "Guide to a Title List" on page 78.) Connections I Press [PAUSE F] to pause recording. Press [PAUSE F]] or [REC I] again to restart recording. Wait for a moment 90% This operation may take awhile to be completed. Basic Setup To set one-touch timer recording (OTR)...This is a simple way to set the recording time in blocks of 30 minutes. Press [REC I] repeatedly until the desired recording time (30 minutes to 8 hours) appears on the TV screen. One-touch timer recording will start. I 0:30 Disc Management 0:30 (normal recording) 1:00 Recording 8:00 7:30 • To change the recording length during one-touch timer recording, press [REC I] repeatedly until the desired length appears. • To cancel one-touch timer recording within the specified time, press [STOP C]. Playback Note • When you press [REC I], recording starts immediately and continues until the disc is full or you stop recording. • When the unit clock has not been set, the space for a date and time of title names will be blank. • When you record a TV program onto DVD-RW, DVD-R or DVD+RW/+R, you have to select the TV channel audio beforehand. Only the selected channel audio will be recorded. Refer to "Selecting TV Audio" on pages 32-33 for more details. • You cannot change the recording mode during the recording pause mode. • You can change a channel to be recorded during the recording pause mode. Editing Function Setup Note for one-touch timer recording • The remaining recording time will be displayed on the front panel display during one-touch timer recording. Press [DISPLAY] to see it on the TV screen. • Unlike the timer recording, you can perform the following operations during one-touch timer recording. - Turning off the power (One-touch timer recording will be canceled.). - Using [REC I] or [STOP C] on the remote control. • You cannot use the pause function during one-touch timer recording. • When one-touch timer recording is finished and the power is turned off, the unit will switch to the timer-standby y mode automatically if a timer recording has been programmed. Press [I/y ON/STANDBY] to cancel the timerstandby mode to use the unit continuously. Others EN E7M70UD_D-R560KU_EN.indd 47 47 2008/01/10 17:28:08