Toshiba D-R560KU Owner's Manual - English - Page 49

TIMER RECORDING Introduction 3 Use [K / L] to enter the date, then press [B]. Timer Programming TUE JAN/01 10:00AM Date Date JAN/02 CH DTV125- 1 Start End New Start Program --:-Mode SP CH End --:-- e.g.) digital mode Date JAN/02 CH DTV125- 1 New Start Program 12 : 00AM Mode SP End 1 : 00AM SP 1 : 00 1/1 SP 2 : 00 1/1 6 Use [K / L] to select a recording mode. Date JAN/02 CH DTV125- 1 New Start Program 12 : 00AM Mode SP End 1 : 00AM Connections SP 1 : 00 JAN/01 1/1 Daily MON-SAT MON-FRI SAT FRI When pressing [L] at the current date, the date will change as follows. e.g.) January 1st Basic Setup Refer to "Recording Mode" on page 43. • You can check the remaining recordable space of the disc when you select the recording mode. Date JAN/02 CH DTV125- 1 Start 12 : 00AM Mode SP End 1 : 00AM SP 1 : 00 Disc Management SUN Auto recording mode select...JAN/31 4 5 Use [K / L / { / B] or [the Number buttons] to enter the start and end time, then press [B]. Date JAN/02 CH DTV125- 1 New Start Program 12 : 00AM Mode SP End --:-- When "Auto" is selected as a recording mode, the unit calculates how much time is available on the disc and determines the appropriate recording mode to complete recording the program. Date JAN/02 CH DTV125- 1 New Start Program 12 : 00AM Mode Auto End 1 : 00AM Recording Auto 1 : 00 1/1 SP 2 : 00 1/1 • You cannot make a program which recording time exceeds 12 hours. • "Auto" is only available for one program in the timer program list. • The recording may be cut short, when the available recording space of the disc is too limited. Playback Use [K / L] to select analog digital ("DTV") mode or external input (L1 / L2), then press [B]. Date JAN/02 CH L1 New Start Program 12 : 00AM Mode SP End 1 : 00AM 7 8 Press [ENTER] when all items are entered. Your program setting will be stored. • To set another program, repeat steps 2 to 7. • To exit, press [TIMER PROG.] or [SETUP]. • When 2 or more programs are overlapped, "Timer program overlapped" appears, and the overlapped program will be displayed in blue. To correct the timer program refer to "Checking, canceling, or correcting the timer programming information" on page 51. Editing SP 1 : 00 1/1 To record from external input (e.g., cable/ satellite box), select L1 or L2. Use [K / L] to select the channel number to record. For digital mode, select both major and minor channels. Refer to "How to select a channel number for the timer recording" on page 50 for more details. e.g.) analog mode Date JAN/02 CH 10 New Start Program 12 : 00AM Mode SP End 1 : 00AM Function Setup Press [I/y ON/STANDBY] to set a timer programming. will appear on the front panel display, while this unit waits to make the recording. Others SP 1 : 00 1/1 EN E7M70UD_D-R560KU_EN.indd 49 49 2007/12/17 11:12:10