Toshiba M200 Toshiba Online Users Guide for Satellite Pro M200 - Page 51
If your system has the memory modules stacked on top of one, performing steps
View all Toshiba M200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Getting Started Adding memory (optional) 51 Static electricity can damage the memory module. Before you handle the module, touch a grounded metal surface to discharge any static electricity you may have built up. Avoid touching the connector on the memory module or on the computer. Grease or dust on the connector may cause memory access problems. 9 Carefully remove the new memory module from its antistatic packaging, without touching its connector. 10 Locate an empty memory module slot on the underside of the computer. NOTE If no memory slot is available, you must remove a module by performing steps 2-3 of "Removing a memory module" on page 54. NOTE If your system has the memory modules stacked on top of one another, you must remove the top module first before removing/ installing the bottom module. NOTE For this model Slot A is the bottom slot. Slot B is the top slot. If only one memory module is to be installed, it must be installed in slot A. 11 Pick up the memory module by its sides, avoiding any contact with its connector. Position the module toward the socket, aligning the connector's notch with the matching key in the socket. notch latch connector latch key (Sample Illustration) Aligning the memory module with the socket