Toshiba MD14H63 Owners Manual - Page 17
with an MPEG2 audio decoder
View all Toshiba MD14H63 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
MPEG2 sound You can enjoy motion picture and live concert DVD video discs with dynamic realistic sound by connecting an 0 o amplifier equipped with an MPEG2 audio decoder or MPEG2 audio processor. tB o A'_mplifierequipped with a_] 2PEG2 audio deeodej type digital TaoudCioOAinXpIuAtL l To COAXIAL DIGITAL AUDIO OUT 75 O coaxial cable (not supplied) Use DVD video discs encoded via the Dolby Digital recording system. 2 channel digital stereo You can enjoy the dynamic sound of 2 channel digital stereo by connecting an amplifier equipped with a digital audio input and speaker system (right and left front speakers), ® ® _cmplifier equipped withT I Digital audio input J OAXIAL digital U A I audio input I To COAXIAL DIGITAL AUDIO OUT (not supplied Notes: DO NOT connect the COAXIAL DIGITAL AUDIO OUT jack of the unit to the AC-3 RF input of a Dolby Digital Receiver. This input on your AN Receiver is reserved for Laserdisc use only and is incompatible with the COAXIAL DIGITAL AUDIO OUT jack of the unit. Connect the COAXIAL DIGITAL AUDIO OUT jack of the unit to the "COAXIAl" input of a Receiver or Processor. * Refer to the owner's manual of the connected equipment as well. * When you connect the unit to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections. * The output sound of the unit has a wide dynamic range. Be sure to adjust the receiver's volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound. Turn off the amplifier before you connect or disconnect the unit's power cord. If you leave the amplifier's power on, the speakers may be damaged. I 5YS0101A indb 17