Toshiba MV20Q41 User Manual - Page 14
Clock setting
View all Toshiba MV20Q41 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Basic setup Clock setting The auto clock function will automatically set the built-in clock (Month, Day, Year and Time) when the unit is connected to an antenna or cable system and it is turned off. As the unit searches for a receivable station in your area and it receives a broadcast signal for auto clock, the auto clock needs several minutes to set itself. Auto clock setting To set auto clock to OFF Preparation: • Connect the antenna or cable system. • If you use a cable box, turn it on. • Plug the AC power cord to the AC outlet. When shipped from factory the AUTO CLOCK is set to "ON". But if you do not want auto clock set (Adjustment): 1 Press MENU, then press B or A to select option. 1 Make sure the unit is turned off. • If you press POWER, the Auto Clock set is not effective. 2 Wait at least three minutes and press POWER. • Depending on the reception condition, it may take approx. thirty minutes. CLOCK SET ON/OFF TIMER AUTO CLOCK ON STANDARD TIME DAYLIGHT SAVING TIME / / / / MENU 3 Press DISPLAY to check the clock on the screen. 8 : 47AM MON CH 125 2 Press ▲ or ▼ to select "AUTO CLOCK". CLOCK SET ON/OFF TIMER AUTO CLOCK ON STANDARD TIME DAYLIGHT SAVING TIME / / / / MENU 00 : 00 : 00 SP 4 If the clock is not set, check the antenna condition. The auto clock may not function 3 Press B or A to select "OFF". properly if the reception condition is not CLOCK SET ON/OFF TIMER AUTO CLOCK OFF good. STANDARD TIME DAYLIGHT SAVING TIME / / / / MENU Auto clock adjustment The auto clock adjustment will be performed at 12:00 PM everyday if you turn off the unit. • If you use a cable box and you want auto clock adjustment to be performed, the cable box must be left on. • The auto clock adjustment is not effective when there is a difference of more than 5 minutes exists between the built-in clock time and the actual time. 4 Press MENU repeatedly until the menu screen is cleared. • When the AUTO CLOCK is set to "OFF", the auto clock adjustment does not function. • Set the clock manually 16 . Notes: • If the unit does not operate properly, or No key operation (by the unit and/or the remote control): Static electricity, etc., may affect the player's operation. Disconnect the AC power cord once, then connect it again. • If no buttons are pressed for more than 60 seconds, the menu screen will return to normal TV operation automatically. 14 5S20101A [E]p13-17 14 12/16/04, 4:27 PM