Toshiba MV20Q41 User Manual - Page 18
TV operation
View all Toshiba MV20Q41 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
TV operation TV operation POWER 0-9 VOL +/- TV operation 1 To turn on the unit, press POWER. 2 Adjust the volume level by pressing VOL + or -. The volume level will be indicated on the screen by green bars. As the volume level increases, so do the number of bars. If the volume decreases, the number of green bars also decreases. VOLUME 32 3 Set the TV/CABLE selection to the appropriate position 21 . TV - VHF/UHF channels CABLE - Cable TV channels 4 Press direct channel selection (0-9) to select the channel. TV mode direct channel selection When the TV/CABLE selection is in the TV position, all channels can be instantly selected by using two buttons. (for example, to select channel 2, press "0", then "2". If you press only "2", channel selection will be CH 012 delayed for a few seconds.) For channels 10 and above, press the 2 digits in order. CABLE mode direct channel selection When the TV/CABLE selection is in the CABLE position, channels can be selected as follows: TO SELECT CABLE TV CHANNELS: 1-9: Press "0" twice, then 1-9 as needed. Example, to select channel 2, press "002". 10-12: Press "0", then the remaining 2 digits. Example, to select channel 12, press "012". 13-99: Press the 2 digits in order. Example, to select channel 36, press "36". 100-125: Press the 3 digits in order. Example, to select channel 120, press "120". NOTE FOR CHANNELS 1-12: If only 1 or 2 buttons are pressed, the corresponding channel will be selected in 2 seconds. TV VHF 2-13 UHF 14-69 CABLE VHF 2-13 STD/HRC/IRC 14-36 (A) (W) 37-59 (AA) (WW) 60-85 (AAA) (ZZZ) 86-94 (86) (94) 95-99 (A-5) (A-1) 100-125 (100) (125) 01 (5A) 18 Notes: • If a channel with no broadcast is selected, the sound will auto- matically be muted. • If a station being viewed stops broadcasting, the TV will auto- matically shut itself off after 15 minutes. 5S20101A [E]p18-21 18 12/16/04, 4:27 PM