Toshiba MV20Q41 User Manual - Page 36
Duplicating a video tape
View all Toshiba MV20Q41 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Recording Duplicating a video tape If you connect the unit to another VCR or Camcorder, you can duplicate a previously recorded tape. Make all connections before turning on the power. INPUT Duplicating a video tape STOP REC SPEED Preparation: • Load a cassette tape with the erase prevention tab intact. • Load a previously recorded tape into the playback VCR or Camcorder. Connection with second video recorder Playback VCR 1 Press SPEED to select the desired tape speed SP or SLP. It is recommended that you set the Speed to the SP mode on the recording VCR for best results. 2 Press INPUT to select AUDIO/VIDEO input position. "LINE" will appear on the screen. To VIDEO OUT Audio/Video cable (not supplied) To AUDIO OUT Recording VCR LINE Illustration of MV13Q41 To VIDEO IN To AUDIO IN 3 Press REC to start recording. 4 Press PLAY on the playback VCR or camcorder. 5 Press STOP after duplicating a video tape. Connection with Camcorder Playback Camcorder Recording VCR To AV Jack Note: Unauthorized recording of copyrighted television programs, films, video cassettes and other materials may infringe the rights of copyright owners and be contrary to copyright laws. To VIDEO IN Illustration of MV13Q41 To AUDIO IN Audio/Video cable (not supplied) For duplicating a previously recorded tape from a camcorder, follow the camcorder manufacturer's instructions. A typical camcorder dubbing hookup is shown above. 36 5S20101A [E]p32-36 36 12/16/04, 4:28 PM