Toshiba MV20Q41 User Manual - Page 27

Playback Loading and unloading a cassette tape Use only video cassette tapes marked . Loading Push the center of the tape until it is automatically inserted. Insert the cassette tape with its labeled side facing up and the erase prevention tab positioned at your left. An inverted cassette tape cannot be inserted. Automatic power ON Erase prevention tab When you insert a cassette tape the unit power will turn ON automatically. Automatic playback When loading a cassette tape without an erase prevention tab, playback will start automatically. Unloading 1 Press STOP/EJECT on the front panel or press EJECT on the remote control. 2 Remove the cassette tape. Automatic tape eject This unit will automatically rewind the tape when the tape has ended. And when the tape is rewinded to its beginning, the cassette tape will be ejected automatically. Notes: • Always eject the tape when not in use. • The cassette tape can be ejected even if the POWER is "OFF". To prevent accidental erasure To prevent accidental erasure Remove the erase prevention tab with a screwdriver. Screwdriver To record again Cover the hole with a piece of adhesive tape. Playback Erase prevention tab Tape speed and maximum recording time Adhesive tape Tape Speed SP (Standard Play) SLP (Super Long Play) T-160 2-2/3 hours 8 hours T-120 2 hours 6 hours Video cassette tape T-90 1-1/2 hours 4-1/2 hours T-60 1 hour 3 hours 5S20101A [E]p27-31 27 12/16/04, 4:28 PM T-30 30 minutes 1-1/2 hours 27