Toshiba Qosmio G25 User Manual - Page 72
Connecting the display device, If you are connecting an SVGA monitor, skip
View all Toshiba Qosmio G25 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
72 Getting Started Connecting external display devices You cannot connect both the S-Video port and the Component Out port to the same device at the same time. The computer must be rebooted when switching between the SVideo and Composite port cables. The system display default is set at the factory to S-Video Out. Connecting the display device If you are connecting a television or other video display device to the computer's Component Video Out port, first refer to "Selecting video cables" below for guidelines on choosing a video cable, then refer to 'Connecting a standard television, projector, or VCR/DVD player' below. If you are connecting an SVGA monitor, skip to "Connecting an external monitor or projector" on page 78. Selecting video cables To connect a device to the S-video port, you must purchase an S-video cable. For the best video quality, always use a properly shielded cable. HINT: Toshiba recommends using a cable no longer than 20 feet (approximately 6 meters). Using a poor-quality cable may result in a dull or fuzzy picture, poor color, ghosting, video noise, or loss of video.