Toshiba RD-XS52 Owners Manual - Page 24
Connecting to a satellite system
View all Toshiba RD-XS52 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Connections Connecting to a satellite system Choose one of the following according to your type of satellite receiver. HDMI OUTPUT VIDEO S-VIDEO INPUT1 VIDEO INPUT3 S-VIDEO CHANNEL CHANGE IR RF IN (FROM ANT.) RF OUT (TO TV) VHF / UHF Satellite receiver 3CH 4CH OUT IN Satellite antenna When the satellite receiver does not have audio/ video outputs 1 Connect a satellite antenna to the satellite receiver. 2 Connect the RF IN (FROM ANT.) terminal on the recorder and the RF OUT terminal of the satellite receiver. 3 Connect the RF OUT (TO TV) terminal on the recorder and the antenna input connector of the TV. You will need to: • set "Cable Box/DBS" of "Set Top Box setting" to "C.Box". page 42 • set "Select Input" of "Set Top Box setting"to "3CH" or "4CH". page 42 You can control satellite channels from the recorder. Perform the below. 1) Connect the supplied IR cable to the CHANNEL CHANGE IR jack of the recorder. page 25 2) Set "IR control" of "Set Top Box setting" to "On". page 42 Satellite antenna Satellite receiver Audio outputs Video output DIGITAL AUDIO Y OUTPUT PB PR BITSTREAM/PCM COMPONENT OUTPUT OPTICAL R L VIDEO S-VIDEO OUTPUT HDMI OUTPUT R L VIDEO S-VIDEO INPUT1 INPUT3 C R L VIDEO S-VIDEO C IR When the satellite system has audio/video outputs 1 Connect a satellite antenna to the satellite system. 2 Connect the INPUT1 or INPUT3 (VIDEO/L/R) jacks on the recorder and the audio/video output jacks of the satellite system. 3 Connect the OUTPUT (VIDEO/L/R) jacks on the recorder and the audio/video input jacks of the TV. 4 Connect the RF OUT (TO TV) terminal on the recorder and the antenna input connector of the TV. You will need to: • set "Cable Box/DBS" of "Set Top Box setting" to "C.Box". page 42 • set "Select Input" of "Set Top Box setting" to "Line1". page 42 You can control satellite channels from the recorder. Perform the below. 1) Connect the supplied IR cable to the CHANNEL CHANGE IR jack of the recorder. page 25 2) Set "IR control" of "Set Top Box setting" to "On". page 42 24 Downloaded from www.Manualslib.com manuals search engine