Toshiba RD-XS52 Owners Manual - Page 32
Starting up the recorder
View all Toshiba RD-XS52 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Basic Setup Starting up the recorder After all the necessary connections, • Turn on the equipment connected to the recorder. • Select the corresponding video input on your television. Perform these selections whenever you operate the recorder. Turning the power on Press ON/STANDBY button from the remote control or on the front panel of the recorder. ON/STANDBY button While the icon is flashing, the recorder is checking the status and reading data of the HDD and the DVD drive for startup. If the DVD drive does not contain a disc, the recorder consumes less time to startup, because it does not need to read data from the DVD drive. While the "Loading" icon is flashing, the recorder cannot respond to any operations of buttons other than CH and INPUT SELECT. Operate all other functions after the icon has disappeared. Note • When the recorder is turned on for the first time, the following menu will be displayed after the "Loading" icon has disappeared. See "A: Initial settings" ( page 34). e.g. Initial settings Language English Time & Date setting TV/Cable TV Channel setting Guide channel setting Set Top Box setting ON/STANDBY indicator OPEN/CLOSE TV TV /VIDEO CH VOLUME CH HDD TIMESLIP DVD EASY NAVI INSTANT REPLAY INSTANT SKIP VCR Plus+ REC MENU EXTEND CONTENT MENU OW SK ON/STANDBY button SL IP When the power turns on, ON/STANDBY indicator changes color from red (standby mode) to green (operation). After a few seconds, a startup screen appears. The following icon will appear on the top right corner of the screen. The icon will continue flashing momentarily. e.g. Loading SETUP Turning the power off Press ON/STANDBY button from the remote control or on the front panel of the recorder. The "Unloading" icon appears on the right corner of the top of the screen, and the ON/STANDBY indicator turns red. Then the power turns off. Note • If the recorder freezes for about 15 minutes and will not respond to any buttons, holding down ON/STANDBY button on the front panel for about 10 seconds can force the recorder to turn off. However, this is an emergency measure, which contains a risk of damage to data or discs. Avoid casual use of this measure. If you try this while the recorder is operating properly, especially while the "Loading" or "Unloading" icon is flashing, it may result in reinitialization of the HDD. 32 Downloaded from www.Manualslib.com manuals search engine