Toshiba RS-TX60 User Guide - Page 21
Audio/Video Output, Audio/Video Input 1, Audio/Video Input, Connect a Channel Changing Cable
View all Toshiba RS-TX60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Setup 2: Cable or Satellite Box ᕡ Make sure the cable from the wall is connected to your cable or satellite box. ᕥ Connect a Channel Changing Cable ᕢ Connect a Composite A/V cable from the Audio/Video Output jacks on the cable or (See page 5 for help choosing a channel satellite box to the Audio/Video Input 1 jacks on the back of the DMS. ᕣ Connect a Composite A/V cable from the Audio/Video Output jacks on the DMS to changing cable.) Serial Control cable: Plug Serial Control cable connection 1 the Audio/Video Input jacks on your TV. one end of the Serial Control Serial cable into the Serial/Data ᕤ Connect the phone cord (see page 8). After you complete Guided Setup, you can connector on the cable or connect your DMS to a home network and use a broadband Internet connection instead satellite box. Plug the other of a phone line to connect to the TiVo service. See Chapter 8. end into the Control Out-Serial connector (the upper ᕥ Connect a channel changing cable (see the diagrams to the right). ᕦ Plug in all power cords and turn on your TV. Set your TV to display video from the input jacks you used in step ᕣ. You may have mini jack) on the back of the DMS. IR Control cable: (a) Plug the purple end of the IR Control cable into the Control Out-IR connector (the lower mini-jack) to find the correct TV input setting by pressing the Input or TV/Video button on your on the DMS. (b) Locate the IR sensor (see page 6 for TV's remote control until you see the Welcome screen. (For more help, see page 131.) help). (c) Mount the IR emitters. Place one emitter Once you see the Welcome screen, you're ready to complete Guided Setup. If you need help, see Chapter 2. on top of the cable/satellite box and the other underneath it. Be sure both emitters stick out about 1.5 inches directly in front of the IR sensor. Use the provided adhesive strips to hold the emitters in place. Cable or Satellite Box c b Digital Media Server ® IR Control cable connection a 13 Downloaded from www.Manualslib.com manuals search engine