Toshiba S100 PPS10C-LS101E Users Manual Canada; English - Page 149
Align the notch of the memory module with that of the memory slot
View all Toshiba S100 PPS10C-LS101E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
Optional Devices 5. Slide your fingernail or a thin object under the cover and lift it off. Figure 8-5 Removing the memory module cover 6. Fit the memory module's connectors into the socket at about a 45 degree angle and push the module down until latches on either side snap into place. Align the notch of the memory module with that of the memory slot and gently insert the module into the slot. Figure 8-6 Installing a module Align the grooves of the memory module with the locking tabs of the connector and insert the module into the connector firmly. If you find it difficult to install the memory module, try to adjust the tabs of the connector with a pen tip or other tools. Make sure to hold the memory module with your fingers on the side edges (sides with grooves). ■ Be careful not to drop the screw inside the computer. ■ Do not touch the connectors on the memory module or on the computer. Debris on the connectors may cause memory access problems. User's Manual 8-7