Toshiba S100 PPS10C-LS101E Users Manual Canada; English - Page 159
Parallel printer, TOSHIBA HW Setup, Parallel Port Mode, Print Wizard
View all Toshiba S100 PPS10C-LS101E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
Parallel printer Optional Devices A parallel printer port can be used only when Advanced Port Replicator III is connected. You can connect any standard Centronics-compatible parallel printer to your computer. All you need is an IBM PC™ parallel printer cable. Your dealer can supply one or you can purchase one at most computer stores. The cable's connectors are designed so that it is impossible for you to connect them incorrectly. To connect a printer, follow these steps: 1. Turn off the computer's power. 2. Connect the cable into the Advanced Port Replicator III's parallel port. 3. Tighten the screws that fasten the connector to the Advanced Port Replicator III's parallel port. 4. Connect the other connecter of the cable into the printer's parallel connector. 5. Fasten the connector to the printer with the clips on the parallel port. 6. Turn on the printer's power. 7. Turn on the computer's power. 8. Start the HW Setup program. Refer to Chapter 7, HW Setup. 9. Select the Parallel/Printer tab from the TOSHIBA HW Setup window. 10. Set the Parallel Port Mode and press OK. 11. Choose Reboot for the change to take effect. 12. Select the printer in Windows Add Print Wizard. To access the Add Print Wizard utility, click start, click Control Panel, click Printers and Other Hardware and select the Add Printer. User's Manual 8-17