Toshiba S100 PPS10C-LS101E Users Manual Canada; English - Page 94
Mic Effect, Modem
View all Toshiba S100 PPS10C-LS101E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Operating Basics You can launch the Setup Wizard from the Control Panel to help you to automatically set proper microphone input volumes and ensure that your voice input(s) are working correctly. As you speak into the microphone, the Sound Meter indicates the audio signal that your PC is receiving. The Noise Reduction enhancement helps to eliminate ambient noise from the voice input signal to provide a clean and clear signal to applications. This feature can be used with any microphone. The audio controller can be powered down when the audio function is idle. To enable the Audio Power Management, follow the steps below. 1. Click the Power Management tab. 2. Select the Normal Power Savings in the Power Mode pull-down list. If the No Power Savings is selected, the audio controller always runs. If you want to a more effect for the power management, you can select another mode, the High Power Savings which can save the power than the Normal Power Savings. To select it, follow the steps below. 1. Click the Power Management tab. 2. Select the High Power Savings in the Power Mode pull-down list. 3. Input a time in Power Save Delay (Seconds). If the High Power Saving is selected, you need to play an audio file once before you use a microphone or play an audio CD by the analog CD audio. Mic Effect TOSHIBA Mic Effect provides you with a hands-free environment for holding mutual communication via the Internet Protocol or Local Area Network. If you wish to communicate with someone on your computer, you can use a messenger application. However, with such an application, you would hear your own voice returning to you as echo during the communication if you did not use a headset system or headphone. TOSHIBA Mic Effect will reduce these echoes generated on your computer. Form more information on using the TOSHIBA Mic Effect, refer to its help. Modem This section describes how to connect and disconnect the internal modem to and from a telephone jack. The internal modem does not support voice functions. All data and fax functions are supported. ■ In case of a lightning storm, unplug the modular cable from the telephone jack. ■ Do not connect the modem to a digital telephone line. A digital line will damage the modem. 4-20 User's Manual