Toshiba SD-P7000 User Manual - Page 19
PC Setup - resolution
View all Toshiba SD-P7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Connections PC Setup - After setup, be sure to select RGB-PC source on TV. Connections 1. Set the monitor output resolution on the PC before connecting to the TV. 2. Connect the TV to the PC with the PC cable. 3. Connect the PC audio output to the TV's PC SOUND input. Viewing Setup 1. Turn on the PC. 2. Use the INPUT SELECT button on the remote control to select PC. TV Back Panel ANT IN 75 Monitor Display Specifications Resolution 640x480 800x600 1024x768 1280x768 Horizontal Vertical Frequency(kHz) Frequency(Hz) 31.47 60 35.00 66.67 37.50 75 35.16 37.88 56.25 60 48.08 46.88 72.19 75 48.36 60 56.48 70 60.02 75 47.78 60 NOTES a. For optimum picture quality, use standard WXGA (1280x768) computer output at a 60Hz refresh rate. Using other formats (VGA, SVGA, etc.) or refresh rates may result in reduced picture quality. (To change the computer video output format, please refer to the operating manual for the computer you are using). b. If the message "Out of range" appears on the screen, adjust the PC output to a format listed in the 'Displayable Monitor Output Format Specifications' chart above. c. The synchronization input form for Horizontal and Vertical frequencies is separate. DPM (Display Power Management) mode If the PC goes to power saving mode, the monitor automatically switches to DPM mode. 19