Toshiba Satellite Z830 PT22LC-00M00H Users Manual Canada; English - Page 100
Power-up modes, Windows utilities, Hot keys, Panel power on/off
View all Toshiba Satellite Z830 PT22LC-00M00H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
PORTÉGÉ Z830/Satellite Z830 Series 3. Operate the computer on battery power for five minutes. If you find that the battery pack has at least five minutes of operating time, continue operating until the battery pack is fully discharged, however, if the Battery indicator flashes or there is some other warning to indicate a low battery condition, go to Step 4. 4. Connect the AC adaptor to the DC IN 19V jack of the computer, and to a wall outlet that is supplying power. The DC IN indicator should glow green, and the Battery indicator should glow orange to indicate that the battery pack is being charged, however, in the event that DC IN indicator does not glow this indicates that power is not being supplied - check the connections for the AC adaptor and the power cord. 5. Charge the battery pack until the Battery indicator glows green. Power-up modes The computer has three different power-up modes as follows: Shut Down Mode: The computer will shut down without saving data in view of this you must always save your work before you turn the computer off. Hibernation Mode: Data in memory will be saved to the Solid State Drive. Sleep Mode: Data will be maintained in the computer's memory. Please refer to the sections Turning on the power and Turning off the power in Chapter 1, Getting Started for further information. Windows utilities You can configure various settings associated with both Sleep Mode and Hibernation Mode within the Power Options (to access it, Start -> Control Panel -> System and Security -> Power Options). Hot keys You can use the FN + F3 hot key to enter Sleep Mode or FN + F4 to enter Hibernation Mode. Panel power on/off You can set up your computer so that power is turned off automatically when you close the display panel, and turned on again when you open it. Please note that this function is only available for Sleep Mode or Hibernation Mode, not for Shut Down Mode. User's Manual 5-7