Toshiba TDPMT200 Owners Manual - Page 20
Connection
View all Toshiba TDPMT200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Connection Before connection • Read the owner's manual of the device you are connecting to the projector. • Some types of computer cannot be used or connected to this projector. Check for an RGB output terminal, supported signal p.39 , etc. • Turn off the power of both devices before connecting. • The figure below is a sample connection. This does not mean that all of these devices can or must be connected simultaneously. (Dotted lines mean items can be exchanged.) Computer (for control) To RS-232C terminal p.43 Control cable Video recorder, DVD player, etc. To S-Video output S-Video cable (supplied) VCR, etc To video output Video cable (supplied) RGB component video cable (not supplied) To Y/CB/CR output Green (Y)/Blue (CB)/Red (CR) DVD video recorder, etc. RGB cable (not supplied) To RGB output DVI cable (not supplied) To DVI output Computer Computer Notes • If you want to feed the digital RGB signal, separately available DVI cable is needed. • If you are using the digital RGB signal for input to this unit, some computer models or a certain type of DVI cable may cause on rare occasions noise on the screen. If such is a case, decrease your computer's refresh rate or the resolution. It is also recommended to use a DVI cable in 2 m or less in length. 20