Toshiba TDPMT200 Owners Manual - Page 24
Basic operations Continued
View all Toshiba TDPMT200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Basic operations (Continued) 5 Projector placement angle adjustments The placement angle and the height of the projected image can be adjusted by the foot adjuster. q Lift up the front of the projector to the desired angle, then press the 1 foot adjuster release button. The foot adjuster extends. Release the button to lock the position. w To adjust the horizontal angle, use the tilt adjuster. To stow the foot adjuster, hold up the projector while pressing the foot adjuster release button, 2 then slowly lower the projector. 6 Adjusting the screen size and focus q Use the zooming lever to adjust the screen size. w Use the focusing lever to adjust the focus. Readjusting the projection size with the zooming lever after focusing will cause the projected image to be out of focus. In that case, perform focusing again. Notes • Note that a lamp characteristics may rarely cause the brightness to fluctuate slightly. • A lamp is consumable item. If used for extended periods, images will appear dark, and the lamp could burn out. This is characteristic of a lamp, and is not malfunction. (The lifetime of the lamp depends on conditions of use.) • The DMDTM is made using extremely advanced technology, but there may be black spots (pixels that do not light) or bright spots (pixels that are constantly lit) on the panel. Please note that these are not malfunctions. • Although this projector supports a wide range of RGB signals p.39 , any resolutions will be expanded or shrunk, which will affect image quality slightly. • With some models of computer having LCD displays or the like, displaying images simultaneously on the projector and the monitor's display may prevent the images from displaying properly. If this happens, turn off the computer's LCD display. For information on how to turn off the LCD display, see the owner's manual of your computer. • If a signal not supported by the projector is input, the "Unsupported signal" will appear. • If no signal is being input from the connected device, the "No signal" will appear. • If an unavailable operation button is pressed, the icon will appear. 24