Toshiba TDPMT200 Owners Manual - Page 25

English Français Español Deutsch Italiano Português Svenska Using handy features ■ Using auto setting This function sets up the projector to the optimum state for each type of the input signal by using simple operations. 1 Press the SET UP button. Control panel Remote Control The Set up menu appears. 2 Press the SET UP button again. The displayed menu item is automatically adjusted/set. For computer input, the icon will appear during processing. For manual adjustment and setting, see the following table p.26 . Notes • The image may not be projected or auto adjustment/setting may not be performed correctly for input signals other than those supported by the projector p.39 , p.40 , p.41 . • Keystone adjustment cannot be corrected automatically. ● Correcting the keystone distortion When the foot adjuster p.24 is used to change the projector placement angle while projecting the image, the picture will undergo keystone (trapezoidal) distortion. This projector is capable of correcting this keystone distortion. Before correction After correction ● Manual adjustment Press the SET UP button to display the Set up menu and select [Keystone]. Use the buttons for keystone adjustment. When the adjustment is finished, press the RETURN button. The menu disappears. Notes • Depending on the amount of keystone adjustment and the content of images, some information may be lost, or the picture quality may suffer. • Keystone adjustment is available for the keystone distortion in a slant angle of ±15 degrees. • Keystone adjustment will not change the shape of the menus, the start-up screen, and the background (with no signal input). Operations 25