Toshiba TLP-T401U LCD Projector TLP-T400/T500/T700 Users Guide (PDF) - Page 25
Sending the camera, s images to a computer
View all Toshiba TLP-T401U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Using the document camera (Continued) I Sending the camera's images to a computer (Models equipped with PC card slot) Models equipped with a PC card slot can use a wireless LAN PC card to send images taken with the document camera to a computer in JPEG format, and open them, or save them to disk. 1 Preparing the computer and projector • Mount the supplied wireless LAN PC card referring to "Mounting a PC card" p.23 , and select PC card input in accordance with "Select input" p.27 . • Set up the computer and projector in accordance with "Preparation" p.34 , and enable wireless LAN communication. 2 Operating the projector q Switch to camera input. w Display the camera image, and press the STORE IMAGE button. A message appears on the screen, confirming that you wish to save the image. W.BALANCE OVERLAY ARM LIGHT LOCK STORE IMAGE CAMERA GAIN CAMERA e Press the button to save the image. (To not save the image, use the buttons to select No, then press the button.) The image data is temporarily saved in the projector as a JPEG file. When the save is complete a message appears, then disappears after a moment. 3 Operating the computer q Launch the Wireless Utility software application. w Click on the Document camera icon . The Wireless Utility window changes to Document camera mode. e Select Open a file or Save to Disk. If you only want to view the image taken with the document camera on the computer screen, select Open a file. To save the JPEG file sent from the projector to disk, select Save to Disk. r Select the projector on which the images were temporarily saved in step 2 . A list of the MAC addresses of the wireless LAN PC cards p.32 , p.59 mounted on the projectors that are available for communication appears. (If projector name has been set up already, it is shown instead of the MAC address.) Select the desired projector from this list. Then icon is displayed on the projector's screen for few seconds. t Click on the button. If Open a file was selected in step e Open the JPEG file sent from the projector, and display it on the computer. The software application linked to the jpg extension on that computer displays the file. If Save to Disk was selected in step e A dialog box appears, prompting you to select a location in which to save the JPEG file sent from the projector. Specify a file name in this dialog box to save the file. To view or save another image from the camera, repeat w and e of step 2 , and t of step 3 as many times as necessary. Notes • Only one image can be saved on this projector temporarily at a time. If another image is saved, the current one is overwritten. • Any adjustments other than CAMERA GAIN (+/-) and Sharpness will not be reflected on the forwarded image. • It is not possible to photograph resized or frozen images. • The size of the saved file will vary, depending on the image. Operations 48 49