Tripp Lite B072-016-1A B072-008-1 and B072-016-1 Owner's Manual 933350 (Englis - Page 10

6. Operation (continued) 6.3 On-Screen Display (OSD) F2 SETTINGS (continued) Hotkey By default, the hotkey used in keyboard hotkey commands and to open the OSD is the [Shift] key, but this can be changed to any of the four options below. To toggle between commands, highlight the Hotkey option and press the [Spacebar] key. (SH-SH) • Press and release the [Shift] key twice to open the OSD. • Press and release the [Shift] key, and then press and release the plus [+] key to switch to the next accessible port. • Press and release the [Shift] key, and then press and release the minus [-] key to switch to the previous accessible port. (CL-CL) • Press and release the Left [Ctrl] key twice to open the OSD; or, press and release the Right [Ctrl] key, and then press and release the Left [Ctrl] key. • Press and release either [Ctrl] key, and then press and release the plus [+] key to switch to the next accessible port. • Press and release either [Ctrl] key, and then press and release the minus [-] key to switch to the previous accessible port. (CLF11) • Press and release either [Ctrl] key, and then press and release the [F11] key to open the OSD. • Press and release either [Ctrl] key, and then press and release the plus [+] key to switch to the next accessible port. • Press and release either [Ctrl] key, and then press and release the minus [-] key to switch to the previous accessible port. (PRSCR) • Press and release the [Print Screen] key once to open the OSD. • When you choose [Print Screen] as your hotkey, the keyboard hotkey commands are disabled, leaving the OSD as the only way to access the connected computers. Autoskip By default, the Autoskip setting is enabled, which prevents users from accessing ports that either don't have a computer connected to them, or that have a powered-off computer connected to them. To toggle this setting on/ off, highlight it and press the [Spacebar] key. Serial Port By default, the Serial Port setting is enabled, which allows a local firmware upgrade to be performed. To toggle this setting on/off, highlight it and press the [Spacebar] key. Note: This setting affects the firmware upgrade port only, and has nothing to do with the Serial port on the back of the unit. Keyboard Language By default, the Keyboard Language setting is set to US English, but it can be changed to French (FR) or German (DE). To toggle between these three language settings, highlight the Keyboard Language setting and press the [Spacebar] key. Switch Name By default, the switch name is NETCOMMANDER 16IP, but this can be changed. Simply move the OSD cursor to the Switch Name and type in the desired name. Delete any characters that you don't want. The Switch Name can be up to 18 characters in length, with spaces counting as characters. F7 - Defaults You can restore the default settings of the local OSD by pressing the [F7] key. When pressed, you will be prompted to confirm that you wish to continue. If yes, press the [Y] key to restore the default values. Note: All of the local OSD settings, including Security and User Settings, will be restored. 10 14-03-231-933350.indd 10 3/27/2014 4:38:37 PM