Tripp Lite B072-016-1A B072-008-1 and B072-016-1 Owner's Manual 933350 (Englis - Page 4

Configuration, Installation

Get Tripp Lite B072-016-1A PDF manuals and user guides View all Tripp Lite B072-016-1A manuals
Add to My Manuals
Save this manual to your list of manuals

Page 4 highlights

4. Configuration 4.1 Front Panel 12 3 Figure 4.1 B072-016-1 NetCommander KVM front panel 1 Port Select Buttons: Press these buttons to toggle back and forth between ports. Pressing both "Select" buttons at the same time also performs a system reset. 2 "Port Selected" LED: The "Port Selected" LED will illuminate above the port that is currently selected. 3 "CPU On" LED: The "CPU On" LEDs will illuminate for all ports that have a server connected (server must be powered on). 4.2 Back Panel 12 3 4 Figure 4.2 B072-016-1 NetCommander KVM rear panel 1 Power Socket: The power cord from the AC power source plugs in here. 2 Firmware Upgrade Port: Insert the included firmware upgrade cable here to download firmware upgrade data. 3 CPU Port Section: Insert the Cat5/5e/6 cable from each PC or server. 4 KVM Console Ports: The keyboard, monitor and mouse plug in here. 5. Installation 5.1 Rackmount Considerations 5.1.1 Ambient Operating Temperature The ambient operating temperature in the rack may be an issue and depends on the rack load and ventilation. When installing the KVM switch in a closed or multi-unit rack assembly, make sure that the temperature will not exceed the maximum rated ambient temperature. 5.1.2 Airflow Ensure that the airflow through the rack is not compromised. 5.1.3 Circuit Overloading When connecting the KVM switch to the supply circuit, consider the effect that overloading of circuits might have on over-current protection and supply wiring. Reliable grounding of all rack-mounted equipment must be maintained. To protect against circuit overloading you should connect your Console KVM and attached computers/servers to a Tripp Lite SmartPro® or SmartOnline® UPS System. 4 14-03-231-933350.indd 4 3/27/2014 4:38:34 PM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
4
4. Configuration
4.1 Front Panel
Figure 4.1 B072-016-1 NetCommander KVM front panel
1
Port Select Buttons:
Press these buttons to toggle back and forth between ports. Pressing
both "Select" buttons at the same time also performs a system reset.
2
"Port Selected" LED:
The "Port Selected" LED will illuminate above the port that is currently
selected.
3
"CPU On" LED:
The "CPU On" LEDs will illuminate for all ports that have a server connected
(server must be powered on).
5. Installation
The ambient operating temperature in the rack may be an issue and depends on the rack load and
ventilation. When installing the KVM switch in a closed or multi-unit rack assembly, make sure that
the temperature will not exceed the maximum rated ambient temperature.
Ensure that the airflow through the rack is not compromised.
When connecting the KVM switch to the supply circuit, consider the effect that overloading of
circuits might have on over-current protection and supply wiring.
Reliable grounding of all rack-mounted equipment must be maintained.
To protect against circuit overloading you should connect your Console KVM and attached
computers/servers to a Tripp Lite SmartPro
®
or SmartOnline
®
UPS System.
5.1 Rackmount Considerations
5.1.1 Ambient Operating Temperature
5.1.2 Airflow
5.1.3 Circuit Overloading
Figure 4.2 B072-016-1 NetCommander KVM rear panel
4.2 Back Panel
1
Power Socket:
The power cord from the AC power source plugs in here.
2
Firmware Upgrade Port:
Insert the included firmware upgrade cable here to download firmware
upgrade data.
3
CPU Port Section:
Insert the Cat5/5e/6 cable from each PC or server.
4
KVM Console Ports:
The keyboard, monitor and mouse plug in here.
1
2
3
1
2
3
4
14-03-231-933350.indd
4
3/27/2014
4:38:34 PM