Tripp Lite B072-016-1A B072-008-1 and B072-016-1 Owner's Manual 933350 (Englis - Page 16
Firmware Upgrade
View all Tripp Lite B072-016-1A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
7. Firmware Upgrade (continued) 7.6 Firmware Upgrade Once you have determined that your KVM and/or SIU(s) need to be upgraded, follow the steps below to install the new firmware. 1. In the Firmware Upgrade Utility main screen, open the Options drop-down menu at the top of the screen and select the Com Port option. Select the com port of the upgrade computer that the Firmware Upgrade Cable is connected to and click OK. 2. Open the File drop-down menu at the top of the screen and select the Open option. Navigate to and select the firmware upgrade file you downloaded from the Tripp Lite website. 3. To upgrade the OSD firmware, check the NetCommander CAT5 KVM Switch OSD box, and then click the Start button to begin the upgrade process. A prompt will appear to warn you that the KVM screen will be dark during the upgrade process. Click OK to proceed. Towards the end of the upgrade, a prompt will appear asking if you want to set the OSD to its default settings. If yes, click the Yes button. If no, click the No button. The upgrade will finish, and the new firmware version number will be displayed. 4. To upgrade the Manage firmware, check the NetCommander CAT5 KVM Switch Manager box, and then click the Start button to begin the upgrade process. A prompt will appear to warn you that the KVM screen will be dark during the upgrade process. Click OK to proceed. Towards the end of the upgrade, a prompt will appear asking if you want to set the OSD to its default settings. If yes, click the Yes button. If no, click the No button. The upgrade will finish, and the new firmware version number will be displayed. 5. To upgrade the SIU firmware, check the box(es) in the middle of the utility next to the SIU(s) you wish to upgrade, and then click the Start button to begin the upgrade process. A prompt will appear to warn you that the KVM screen will be dark during the upgrade process. Click OK to proceed. The upgrade will finish, and the new firmware version number will be displayed. 16 14-03-231-933350.indd 16 3/27/2014 4:38:38 PM