Tripp Lite B097048 Owners Manual for B093- B097- and B098-Series Console Serve - Page 108

6. SSH Tunnels and SDT Connector 6.2.4 Make an SDT Connection Through the Gateway to a Host Simply point at the host to be accessed, and click on the service to be used in accessing that host. The SSH tunnel to the gateway is automatically established, the appropriate ports redirected through to the host and the appropriate local client application is launched pointing at the local endpoint of the redirection: Note: The SDT Connector client can be configured with an unlimited number of gateways. Each gateway can be configured to port forward an unlimited number of locally networked hosts. Similarly, there is no limit on the number of SDT Connector clients who can be configured to access the gateway. Nor are there limits on the number of host connections that an SDT Connector client can concurrently have open through the one gateway tunnel. There is a limit on the number of SDT Connector SSH tunnels that can be open at the same time on a particular gateway. Tripp Lite console servers support at least 50 concurrent connections. For example, a site with a Tripp Lite gateway can have up to 50 users securely controlling an unlimited number of network attached computers and devices (servers, routers, etc.) at that site, at any time. Tripp Lite console servers support hundreds of simultaneous client tunnels. 6.2.5 Manually Adding Hosts to the SDT Connector Gateway For each gateway, you can manually specify the network-connected hosts accessed through that console server. For each host, specify the services used in communicating with the host. • Select the newly added gateway and click the host icon you can select File: New Host. to create a host that is accessible via the gateway. Alternately, 108