Tripp Lite B097048 Owners Manual for B093- B097- and B098-Series Console Serve - Page 232
Dial-In Settings, 1.20 DHCP Server
View all Tripp Lite B097048 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 232 highlights
14. Configuration from the Command Line 14.1.19 Dial-In Settings To enable dial-in access on the DB9 serial port from the command line with the following attributes: Local IP Address Remote IP Address Authentication Type: Serial Port Baud Rate: Serial Port Flow Control: Custom Modem Initialization: Callback phone User to dial as Password for user 172.24.1.1 172.24.1.2 MSCHAPv2 115200 Hardware ATQ0V1H0 0800223665 user1 secret Run the following commands: # config -s config.console.ppp.localip=172.24.1.1 # config -s config.console.ppp.remoteip=172.24.1.2 # config -s config.console.ppp.auth=MSCHAPv2 # config -s config.console.speed=115200 # config -s config.console.flow=Hardware # config -s config.console.initstring=ATQ0V1H0 # config -s config.console.ppp.enabled=on # config -s config.console.ppp.callback.enabled=on # config -s config.console.ppp.callback.phone1=0800223665 # config -s config.console.ppp.username=user1 # config -s config.console.ppp.password=secret To make the dialed connection the default route: # config -s config.console.ppp.defaultroute=on Please note that supported authentication types are 'None', 'PAP', 'CHAP' and 'MSCHAPv2'. Supported serial port baud-rates are '9600', '19200', '38400', '57600', '115200', and '230400'. Supported parity values are 'None', 'Odd', 'Even', 'Mark' and 'Space'. Supported data-bits values are '8', '7', '6' and '5'. Supported stop-bits values are '1', '1.5' and '2'. Supported flow-control values are 'Hardware', 'Software' and 'None'. If you do not wish to use out-of-band dial-in access, please note the procedure for enabling start-up messages on the console port is covered in section 15. Advanced Configuration. The following command will synchronize the live system with the new configuration: # config -a 14.1.20 DHCP Server To enable the DHCP server on the console management LAN with settings: Default lease time 200000 seconds Maximum lease time 300000 seconds DNS server1 192.168.2.3 DNS server2 192.168.2.4 Domain name company.com Default gateway 192.168.0.1 IP pool 1 start address 192.168.0.20 IP pool 1 end address 192.168.0.100 Reserved IP address 192.168.0.50 MAC to reserve IP for 00:1e:67:82:72:d9 Name to identify this host John-PC 232