Tripp Lite B097048 Owners Manual for B093- B097- and B098-Series Console Serve - Page 233
Services
View all Tripp Lite B097048 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 233 highlights
14. Configuration from the Command Line Issue the commands: # config -s config.interfaces.lan.dhcpd.enabled=on # config -s config.interfaces.lan.dhcpd.defaultlease=200000 # config -s config.interfaces.lan.dhcpd.maxlease=300000 # config -s config.interfaces.lan.dhcpd.dns1=192.168.2.3 # config -s config.interfaces.lan.dhcpd.dns2=192.168.2.4 # config -s config.interfaces.lan.dhcpd.domain=company.com # config -s config.interfaces.lan.dhcpd.gateway=192.168.0.1 # config -s config.interfaces.lan.dhcpd.pools.pool1.start=192.168.0.20 # config -s config.interfaces.lan.dhcpd.pools.pool1.end=192.168.0.100 # config -s config.interfaces.lan.dhcpd.pools.total=1 # config -s config.interfaces.lan.dhcpd.staticips.staticip1.ip=192.168.0.50 # config -s config.interfaces.lan.dhcpd.staticips.staticip1.mac=00:1e:67:82:72:d9 # config -s config.interfaces.lan.dhcpd.staticips.staticip1.host=John-PC # config -s config.interfaces.lan.dhcpd.staticips.total=1 The following command will synchronize the live system with the new configuration: # config -a 14.1.21 Services You can manually enable or disable network servers from the command line. For example, to guarantee the following server configuration: HTTP Server Enabled HTTPS Server Disabled Telnet Server Disabled SSH Server Enabled SNMP Server Disabled Ping Replies (Respond to ICMP echo requests) Disabled TFTP server Enabled # config -s config.services.http.enabled=on # config -d config.services.https.enabled # config -d config.services.telnet.enabled # config -s config.services.ssh.enabled=on # config -d config.services.snmp.enabled # config -d config.services.pingreply.enabled # config -s config.services.tftp.enabled=on To set secondary port ranges for any service: # config -s config.services.telnet.portbase='port base number' # config -s config.services.ssh.portbase='port base number' # config -s config.services.tcp.portbase='port base number' # config -s config.services.rfc2217.portbase='port base number' # config -s config.services.unauthtel.portbase='port base number Default: 2000 Default: 3000 Default: 4000 Default: 5000 Default: 6000 The following command will synchronize the live system with the new configuration: # config -a 233