Tripp Lite B097048INT Owners Manual for B093- B097- and B098-Series Console Se - Page 224
UPS Connections
View all Tripp Lite B097048INT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 224 highlights
14. Configuration from the Command Line 14.1.8 UPS Connections Managed UPS Systems Before adding a managed UPS, make sure at least one port has been configured to run in 'device mode', and that the device is set to 'ups'. To add a managed UPS with the following values: Connected via Port 1 UPS name My UPS Description UPS in room 5 Username to connect to UPS User2 Password to connect to UPS secret Shutdown order 2 (0 shuts down first) Driver genericups Driver option - option option Driver option - argument argument Logging Enabled Log interval 2 minutes Run script when power is critical Enabled # config -s config.ups.monitors.monitor1.port=/dev/port01 If the port number is higher than 9, eg port 13, enter: # config -s config.ups.monitors.monitor1.port=/dev/port13 # config -s "config.ups.monitors.monitor1.name=My UPS" # config -s "config.ups.monitors.monitor1.description=UPS in room 5" # config -s config.ups.monitors.monitor1.username=User2 # config -s config.ups.monitors.monitor1.password=secret # config -s config.ups.monitors.monitor1.sdorder=2 # config -s config.ups.monitors.monitor1.driver=genericups # config -s config.ups.monitors.monitor1.options.option1.opt=option # config -s config.ups.monitors.monitor1.options.option1.arg=argument # config -s config.ups.monitors.monitor1.options.total=1 # config -s config.ups.monitors.monitor1.log.enabled=on # config -s config.ups.monitors.monitor1.log.interval=2 # config -s config.ups.monitors.monitor1.script.enabled=on Make sure to increment the total monitors: # config -s config.ups.monitors.total=1 The five commands below will add the UPS to 'Managed devices. Assuming there are already two managed devices configured: # config -s "config.devices.device3.connections.connection1.name=My UPS" # config -s "config.devices.device3.connections.connection1.type=UPS Unit" # config -s "config.devices.device3.name=My UPS" # config -s "config.devices.device3.description=UPS in toom 5" # config -s config.devices.total=3 To delete this managed UPS: # config -d config.ups.monitors.monitor1 Decrement monitors.total when deleting a managed UPS 224