Tripp Lite B097048INT Owners Manual for B093- B097- and B098-Series Console Se - Page 45
USB Consoles, 1.9 Link Layer Discovery Protocol LLDP
View all Tripp Lite B097048INT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
4. Serial Port, Host, Device and User Configuration 4.1.8 USB Consoles B093, B097, and B098 model console servers running firmware 3.16.5 or later support USB console connections to devices from a wide range of vendors, including Cisco, HP, Dell and Brocade. All the USB ports on these console servers can also function as plain RS-232 serial ports when a USB-to-serial adapter is connected. These USB ports are available as regular port manager ports and are presented numerically in the web UI after all RJ45 serial ports. The RJ45 serial ports are presented in Serial & Network > Serial Port. The common settings (baud rate, etc.) are used when configuring the ports. Some operations (e.g., sending serial breaks) may not work, depending on the implementation of the underlying USB serial chip. 4.1.9 Link Layer Discovery Protocol (LLDP) The Link Layer Discovery Protocol (LLDP) is a protocol that allows system administrators to gather information about devices physically connected to managed switches. It is available for use on B093-Series devices. The LLDP service is enabled through the System > Services page. When the service is enabled, the lldpd daemon is loaded and running. The Service Access tab controls which network interfaces are monitored by the lldpd daemon. When LLDP is granted access to an interface, it will use that interface, even if the interface has been disabled through System > IP. LLDP neighbors are visible through the Status > LLDP Neighbors page. This page shows neighbors detected and indicates the console manager is sending information. Note: Although the LLDP service can be granted access to non-Ethernet interfaces (for example, G3, G4 and PSTN dial-up interfaces), it currently ignores non-Ethernet interfaces. The lldpcli shell client interacts with and configures the running LLDP service. Persistent custom configuration changes can be added to the system through configuration files placed in /etc/config/lldpd.d/. Custom configuration files (which must have filenames ending with .conf) will be read and executed by lldpcli when the LLDP service starts. The /etc/ directory is read-only on Tripp Lite hardware. Most default configuration files otherwise stored in /etc/ are on Tripp Lite hardware in /etc/config/, which is writeable. The default lldpd configuration file lldpd.conf is saved in /etc/config/ on Tripp Lite hardware. It is not safe to save custom configuration details. There are circumstances in which this file is regenerated automatically, in which case all customizations will be lost. The etc/config/lldpd.d/ directory, which is also writable and created on first boot is safe to write to. Any Custom LLDP configurations must be stored as *.conf files in this directory. When enabled, LLDP frames issued by a Tripp Lite Console Manager will reveal sensitive information such as hostname and firmware version. LLDP frames are not passed through by 802.3ab compliant switches. Tripp Lite Console Managers have the LLDP service disabled by default. Both lldpd and lldpcli have standard manual pages but because of space concerns, these pages are not shipped with Tripp Lite hardware. However, both manual pages are available on the lldpd project: man lldpd can be found at https:// vincentbernat.github.io/lldpd/usage.html#lldpd8; and man lldpcli can be found at https:// vincentbernat.github.io/lldpd/usage.html#lldpcli8. Note: Tripp Lite uses lldpd 0.9.2. 45