Tripp Lite SNMPWEBCARD Installation Guide for SNMPWEBCARD 933179 - Page 47
Paramètres du réseau, PARAMÈTRES DE L'INTERFACE ETHERNET, Configuration du service réseau
View all Tripp Lite SNMPWEBCARD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Installation HARDWARE PARAMETERS: Serial channels will use a baud rate of 9600 RTC date and time in GMT: 03/13/2012 18:19:51 This board's serial number is This board's Ethernet MAC Address is 00:06:67:22:3E:B1 After board is reset, start-up code will wait 5 seconds Press any key in 5 seconds to change these settings. Press A to Accept the settings, or M to Modify?m Enter the root password: ********* 3-5-1 Paramètres du réseau Suivre les invites pour configurer les paramètres d'adresses IPv4 et IPv6. Le mot de passe par défaut en mode terminal est TrippLite. Des exemples de paramètres IP sont présentés - fournir votre propre information IP quand vous configurez votre carte. PARAMÈTRES DE L'INTERFACE ETHERNET : Obtain IPv4 settings automatically using DHCP for Ethernet interface? [Y] IP address? [10.1.0.165] Subnet mask? [255.0.0.0] Gateway address? [10.0.0.1] Enable DHCPv6 for the Ethernet interface? [Y] Enable static IPv6 for the Ethernet interface? [N] IPv6 address? [2001:DB8::1:58:4F43:4849:544C] Network prefix length? [64] DNS server? [10.0.0.8] This card's host name? [poweralert-061033462177] This card's domain? [tlsoftwaredev.local] 3-5-2 Configuration du service réseau Les messages-guides suivants configurent les méthodes de connexion que la SNMPWEBCARD acceptera. Enable SNTP? [Y] Enable FTP? [Y] Port number? [21] Enable HTTP? [Y] Port number? [80] Enable HTTPS? [Y] Port number? [443] Enable Telnet Menu? [Y] Port number? [23] Enable Telnet Programs? [Y] Port number? [5214] Enable SSH Menu? [Y] Port number? [22] Enable SSH Programs? [Y] Port number? [2112] Enable SNMP? [Y] Port number? [161] Enable SNMPv1? [Y] Enable SNMPv2c? [Y] Enable SNMPv3? [Y] 47 13-01-199-933179.indb 47 4/23/2013 4:01:57 PM