Troy-Bilt TB180B Operation Manual - Page 9

ENGLISH Operating the Blower Blower Operation The on/off toggle switch has two settings; off and on. The rear switch position, marked "I", is on. The forward switch position, marked "O", is off. (See Figure 6) WARNING: The blower can throw debris, causing injury to those nearby. • Do not blow nails, bolts, rocks, or other hard objects. • Do not operate blower near bystanders or pets. • Be careful when blowing debris from stairs, corners, or other tight areas. Objects can be blown back toward operator. • Wear approved eye protection, long pants, and shoes while operating this blower. Properly assemble the blower for blower operation (see page 7, Assembling Blower). Follow the steps below to operate the blower. 1. Hold blower using the handle on housing. (See Figure 6) 2. When ready to start the blower, toggle the on/off switch to the "I" setting. 3. To stop the blower, toggle the on/ off switch to the off "O" setting. Figure 7- Holding blower for blower operation Figure 6 - On/Off switch positions 9